I tried to install Netweaver 7.02 trial version.
But the process is not complete.
Anyone can help?
I have attached the print screen image of error message.
Regards,
Tonio
I tried to install Netweaver 7.02 trial version.
But the process is not complete.
Anyone can help?
I have attached the print screen image of error message.
Regards,
Tonio
Hello
I wander how to see SAP Start Services are running. Namely I have situation like in note 1401712.
I can not check it via port 50013 and via jcmon I can see server0 and icm are running(not sure though for scs and maybe something more)
It is the portal part (instance) of an BI 7.3 system which I would like to patch
If I see according to your instruction SCS is not running hoe to make it running
Than you in advance
jan
Hi guys,
we are having a small problem here.
We went from SAP BASIS 731 to 740.
In SOST all our Faxes stay gray with msg number XS718
''The SAP system has transferred the message to the connected mail server. The mail server has recognized the data for the recipient FAX=#########@Domain.com as valid and will deliver or forward the message as required. You can expect a further delivery status notification.''
Before every fax was green with msg number XS073
''The message was successfully sent to FAX=##########@Domain.com. However, no information exists about the delivery to FAX=##########@Domain.com. There are two reasons for this:
And I just want to be clear, the faxes are sent properly, so the issue is not about the transmission, it's about the status staying gray instead of green.
Thank you
Dear
when we use webgui and user made po and when he modifies po enter space bar that field shows blank but earlier it shows last value of po in all tab
kindly give me some workaround our user are stuck at this stage from 3 days they need enter whole po and all its value again
send us some helpful documents
Regards
Hi,
I am trying to integrate SAP BO Server with a .Net application for this i need to handle session time out of BO Server. Please suggest if i can handle session time out in BO Server. I handling the same in Tableau server through SAML. I have attached the flow. Please suggest how to handle session time out of SAP BO Server.
Thanks.
Regards,
Devashish
Hi experts,
When i was running the SPAM for basis upgrade (SAPKB73103), the server automatically stops stops and shows the below error.
But when i again logged , i got the following error.
Please Help . I am in a critical situation as none of the users wasn't bale to logging.
Awaiting yours earliest reply
Regards
Praveen
Dear all,
i am trying to run SUM to update a 7.31 SP0 NetWeaver Java Stack, which runs within a Virtual Machine, but the system gets following error message when executing the step
"INPUT-USER-CREDENTIALS" (Input Java Administrator user credentials).
Could not display dialog UserPasswords. Could not execute dialog UserPasswords. See previous messages. Error while trying to validate Administrator password. Possible reason: the J2EE engine is not started. Error while trying to get initial context. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.] com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance. com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception. Nested exception is: java.io.EOFException: End of stream is reached unexpectedly during input from Socket[addr=/192.168.51.160,port=50004,localport=51407]
I did provide the correct user password and the J2EE is up and running. Everything else does work as normal, just the SUM does not want to work. That´s the first time I used SUM as JSPM was disabled.
Any help is welcome.
Regards,
Andreas
Hallo, I try to add my certificat signed from godedy, to NW 7.40 java
environment.
I have two java(portal) environments - one on NW 7.0 and one on NW 7.40
and two pem files - key.pem and cert.pem or one pfx file, already signed by godedy. On the 7.0 there are no problems with the certificat if I
open
IE browser.
I have imported private key from pfx file in NW 7.40 java keystore successful, but it's not possible to include certificat from cert file, the message "ERROR: -> iaik.asn1.CodingException:
ASN.1
creation error: iaik.asn1.CodingException: Length: Too large ASN.1
object: 40"
is thrown.
As a result I can't export view to pse to get signed certificat to start working.
Dear All,
We are facing some problems with some special SSO requirements. We have a three system landscape (NW 7.4 ABAP only) and in DEV and INT this problem occur: We have a webdynpro ABAP (selfdeveloped) but the problem exists also for all SAP-Webdynpros. If our developers want to test the webdynrpo with SE80 (or also with SICF) SSO is not working, they get the normal login screen in https.They can login and the SSO cookie gets generated but in our PRD System there is no login necessary it they test the same webdynpro in SE80! There is no portal or some other system involved, everything on the same system.
Things we already checked:
Things we found out:
Are there others settings which have to be done that SSO is working in SE80 and SICF?
Thanks a lot!
Hi all..
I logged into SAP server with Administrator users (My SAP systems are installed on Windows 2008 r2).
Suddenly, i cannot open or access SAP MMC any more. I see this error saying do not have sufficient rights.
I had to manually do stopsap to stop 3 systems. My question is:
why this error appeared all of a sudden, i usually start/stop SAP systems using SAP MMC.
If this problem happens again, how to check the status of all SAP systems? as hostname:5xx13 takes a lot of time and only shows individual system,
while executing stopsap, its takes a long time, is there a better way to perform stop operation?
it seems the system is taking a lot of memory/CPU, in such case remote connection is slow. So, how to perform the stop operation from outside?
thanks and regards
Hi
I am not clear on upgrading neweaver component.
My solution manager 7.1 is on basis 702, so that would be Netweaver 7 EHP2?
Can I upgrade it to NetWeaver 7.3 EHP1 or NW 7.4? If so how?
I have a SAP ERP 6.0 EHP4 ides system, which is on netweaver 7.1, can I upgrade it to Netweaver 7.31 as well?
How can it be achieved without upgrading the system to EHP6? or the concept is not logical?
Hello,
sorry, but a quick google search didn't return any reasonable results, so I decided to quickly ask...
We have a Java system, which has its UME user store in an ABAP system.
Now our functional guys have asked us to disconnect the Java system and connect it to another
ABAP system, meaning it will use the user store of another ABAP system, usage type ERP.
Is that even possible ? If yes, kindly guide me how exactly to do that...
Thanks a lot !!
Hello SDN!
My WebDynpro application should connect to HANA DB via JDBC and read some data. We've made settings according to this http://help.sap.com/SAPhelp_nw73/helpdata/en/1c/e05bc0c9ca41a783169ce4e18c1bfe/content.htm?frameset=/en/e5/e971faafee44ff9e22eae8cfbf920f/frameset.htm¤t_toc=/en/e5/e971faafee44ff9e22eae8cfbf920f/plain.htm&node_id=23. But now I'm confused how to get a connection to the DB. If I use the following code:
Class.forName("com.sap.db.jdbc.Driver");
Connection connection = DriverManager.getConnection("jdbc:sap://hanaServer:31015/?autocommit=false");
without user credentials, then I get an error "com.sap.db.jdbc.exceptions.jdbc40.SQLInvalidAuthorizationSpecException: [10]: invalid username or password".
If I use credentials, everything is ok, but in this case URL to DB and user's credentials are hardcoded which is no good. There're destinations in the link mentioned above. How I can use these destinations in my code to get connection?
regards,
Lev
Hello All.
I am applying EHP3 upgrade on CRM installation.
During Check phase I get this error: The error is but BW consistency, but my system is a CRM system:
ACTIVATION CHECK ERRORS and RETURN CODE in RSUPGRCHECK.PC1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ER7000 "Check for DDIC Consistency of BW Objects" " " " " " "
4 ER7000 "InfoObjects Check" " " " " " "
4 ER7000 "Activate all Dictionary objects ( 255 ):" " " " " " "
4 ER7854 All DDIC objects have been activated / deleted
2EER7000 "InfoObject 0RSPL_ORG is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSPL_ORG": "VIEW" "/BI0/6RSPL_ORG" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_EID is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_EID": "VIEW" "/BI0/7RSTT_EID" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_IONM is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_IONM": "VIEW" "/BI0/7RSTT_IONM" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_IPNM is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_IPNM": "VIEW" "/BI0/7RSTT_IPNM" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_JID is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_JID": "VIEW" "/BI0/7RSTT_JID" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_LGUID is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_LGUID": "VIEW" "/BI0/7RSTT_LGUID" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_OBJNM is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_OBJNM": "VIEW" "/BI0/7RSTT_OBJNM" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_PID is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_PID": "VIEW" "/BI0/7RSTT_PID" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_PVAR is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_PVAR": "VIEW" "/BI0/7RSTT_PVAR" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_QYNM is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_QYNM": "VIEW" "/BI0/7RSTT_QYNM" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_RQID is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_RQID": "VIEW" "/BI0/7RSTT_RQID" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_SVARI is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_SVARI": "VIEW" "/BI0/7RSTT_SVARI" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_TID is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_TID": "VIEW" "/BI0/7RSTT_TID" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_TONAM is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_TONAM": "VIEW" "/BI0/7RSTT_TONAM" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_TRANR is not" "consistent. Activate it." " " " "
3WER7030 InfoObject "0RSTT_TRANR": "VIEW" "/BI0/7RSTT_TRANR" is not active - activating InfoObject now
2EER7000 "InfoObject 0RSTT_USER is not" "consistent. Activate it." " " " "
Thanks for any help
Reza
Hi
I am trying to do a system copy of a NW 7.4 system . The source system is 7.4 SR1 while the target system is 7.4 SR2. I have successfully done the export, but during the import phase 1 of the packages is failing .
TRACE: 2014-11-27 16:04:07 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1_27' starting import package into database:
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load -i SAPAPPL1_27.cmd -dbcodepage 4103 -l SAPAPPL1_27.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
INFO: 2014-11-27 16:06:14 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 2, waiting 89, completed 3, failed 1, total 95 error processing of package SAPAPPL1_27
ERROR: 2014-11-27 16:06:14 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1_27' import package is interrupted with R3load error.
Process '/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load -i SAPAPPL1_27.cmd -dbcodepage 4103 -l SAPAPPL1_27.log -stop_on_error -loadpr
For mode details see 'SAPAPPL1_27.log' file.
Standard error output:
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load=>sapparam(1c): No Profile used.
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sh: module: line 1: syntax error: unexpected end of file
sh: error importing function definition for `BASH_FUNC_module'
sh: module: line 1: syntax error: unexpected end of file
sh: error importing function definition for `BASH_FUNC_module'
Here is the log of the SAPAPPL1_27.log
cat SAPAPPL1_27.log
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20141127160407
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/742_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: version R7.42/V1.8 [UNICODE]
Compiled Sep 1 2014 18:12:24
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load -ctf I /exp/ABAP/DATA/SAPAPPL1_27.STR /tmp/sapinst_instdir/NW740SR2/DB6/COPY/SYSTEM/STD/AS-ABAP/DDLDB6.TPL SAPAPPL1_27.TSK DB6 -l SAPAPPL1_27.log
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.013) R3load dependency loop if calles with -o V option (note 2044380)
DBSL patchinfo (patches.h): (0.015) DB6: seg fault on V10.5 FP4 during connect processing (note 2056603)
--------------------- End of patch information -------------------------
process id 35006
(RTF) WARNING: CREATE FUNCTION template not found in control file "/tmp/sapinst_instdir/NW740SR2/DB6/COPY/SYSTEM/STD/AS-ABAP/DDLDB6.TPL"
(RTF) WARNING: DROP FUNCTION template not found in control file "/tmp/sapinst_instdir/NW740SR2/DB6/COPY/SYSTEM/STD/AS-ABAP/DDLDB6.TPL"
(RDI) WARNING: /exp/ABAP/DATA/SAPAPPL1_27.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /exp/ABAP/DATA/SAPAPPL1_27.STR: unknown file format, assuming version 2
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: job completed
(STAT) DATABASE times: 0.011/0.004/0.001 100.0%/100.0%/100.0% real/usr/sys.
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20141127160407
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20141127160407
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/742_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: version R7.42/V1.8 [UNICODE]
Compiled Sep 1 2014 18:12:24
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load -i SAPAPPL1_27.cmd -dbcodepage 4103 -l SAPAPPL1_27.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.013) R3load dependency loop if calles with -o V option (note 2044380)
DBSL patchinfo (patches.h): (0.015) DB6: seg fault on V10.5 FP4 during connect processing (note 2056603)
--------------------- End of patch information -------------------------
process id 35012
(DB) INFO: connected to DB
(GSI) INFO: dbname = "UI5 "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "sapui5"
(GSI) INFO: release = "2.6.32-504.el6.x86_64"
(GSI) INFO: version = "#1 SMP Tue Sep 16 01:56:35 EDT 2014"
(GSI) INFO: machine = "x86_64"
(RTF) WARNING: CREATE FUNCTION template not found in control file "/tmp/sapinst_instdir/NW740SR2/DB6/COPY/SYSTEM/STD/AS-ABAP/DDLDB6.TPL"
(RTF) WARNING: DROP FUNCTION template not found in control file "/tmp/sapinst_instdir/NW740SR2/DB6/COPY/SYSTEM/STD/AS-ABAP/DDLDB6.TPL"
(RDI) WARNING: /exp/ABAP/DATA/SAPAPPL1_27.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /exp/ABAP/DATA/SAPAPPL1_27.STR: unknown file format, assuming version 2
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /exp/ABAP/DB/SQLFiles.LST
(SQL) INFO: found /exp/ABAP/DB/SQLFiles.LST
(SQL) INFO: Trying to open /exp/ABAP/DB/SQLFiles.LST
(SQL) INFO: /exp/ABAP/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file APPL1.SQL
(SQL) INFO: APPL1.SQL not found
(SQL) INFO: Searching for SQL file /exp/ABAP/DB/DB6/APPL1.SQL
(SQL) INFO: /exp/ABAP/DB/DB6/APPL1.SQL not found
(DB) INFO: SMIMCONT1 created #20141127160408
(DB) INFO: SMIMCONT1~0 created #20141127160408
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMIMCONT1 has been successfully converted ( ignore SQL0150N )
(DB6) Using LOAD API for table SMIMCONT1
(IMP) INFO: import of SMIMCONT1 completed (412726 rows) #20141127160547
(DB) INFO: SMIME_CAPABILITY created #20141127160547
(DB) INFO: SMIME_CAPABILITY~0 created #20141127160547
(IMP) INFO: import of SMIME_CAPABILITY completed (0 rows) #20141127160547
(DB) INFO: SMIME_CAPA_CRYPT created #20141127160547
(DB) INFO: SMIME_CAPA_CRYPT~0 created #20141127160547
(IMP) INFO: import of SMIME_CAPA_CRYPT completed (0 rows) #20141127160547
(DB) INFO: SMIME_CAPA_SIGN created #20141127160547
(DB) INFO: SMIME_CAPA_SIGN~0 created #20141127160547
(IMP) INFO: import of SMIME_CAPA_SIGN completed (0 rows) #20141127160547
(DB) INFO: SMI_BORDER_HIST created #20141127160547
(DB) INFO: SMI_BORDER_HIST~0 created #20141127160547
(IMP) INFO: import of SMI_BORDER_HIST completed (0 rows) #20141127160547
(DB) INFO: SMI_HEADER created #20141127160547
(DB) INFO: SMI_HEADER~0 created #20141127160547
(IMP) INFO: import of SMI_HEADER completed (0 rows) #20141127160547
(DB) INFO: SMI_ITEM created #20141127160547
(DB) INFO: SMI_ITEM~0 created #20141127160547
(IMP) INFO: import of SMI_ITEM completed (0 rows) #20141127160547
(DB) INFO: SMI_RUNTIME_INFO created #20141127160547
(DB) INFO: SMI_RUNTIME_INFO~0 created #20141127160547
(IMP) INFO: import of SMI_RUNTIME_INFO completed (0 rows) #20141127160547
(DB) INFO: SMI_TIMESERIES created #20141127160547
(DB) INFO: SMI_TIMESERIES~0 created #20141127160547
(IMP) INFO: import of SMI_TIMESERIES completed (0 rows) #20141127160547
(DB) INFO: SMI_USER_RNTM created #20141127160547
(DB) INFO: SMI_USER_RNTM~0 created #20141127160547
(IMP) INFO: import of SMI_USER_RNTM completed (0 rows) #20141127160547
(DB) INFO: SMI_VOICE_CUST created #20141127160547
(DB) INFO: SMI_VOICE_CUST~0 created #20141127160548
(IMP) INFO: import of SMI_VOICE_CUST completed (0 rows) #20141127160548
(DB) INFO: SMJV created #20141127160548
(DB) INFO: SMJV~0 created #20141127160548
(IMP) INFO: import of SMJV completed (0 rows) #20141127160548
(DB) INFO: SMMAIN created #20141127160548
(DB) INFO: SMMAIN~0 created #20141127160548
(DB) INFO: SMMAIN~001 created #20141127160548
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMMAIN has been successfully converted ( ignore SQL0150N )
(DB6) Using LOAD API for table SMMAIN
(IMP) INFO: import of SMMAIN completed (126577 rows) #20141127160600
(DB) INFO: SMMESSAGE created #20141127160600
(DB) INFO: SMMESSAGE~0 created #20141127160600
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMMESSAGE has been successfully converted ( ignore SQL0150N )
(DB6) Using LOAD API for table SMMESSAGE
(IMP) INFO: import of SMMESSAGE completed (37356 rows) #20141127160601
(DB) INFO: SMPARAM created #20141127160601
(DB) INFO: SMPARAM~0 created #20141127160601
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMPARAM has been successfully converted ( ignore SQL0150N )
(DB6) Using LOAD API for table SMPARAM
(IMP) INFO: import of SMPARAM completed (191280 rows) #20141127160608
(DB) INFO: SMPS created #20141127160608
(DB) INFO: SMPS~0 created #20141127160608
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMPS has been successfully converted ( ignore SQL0150N )
(DB6) Using LOAD API for table SMPS
(IMP) INFO: import of SMPS completed (38449 rows) #20141127160610
(DB) INFO: SMRL created #20141127160610
(DB) INFO: SMRL~0 created #20141127160610
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMRL has been successfully converted ( ignore SQL0150N )
(DB6) Using LOAD API for table SMRL
(IMP) INFO: import of SMRL completed (76586 rows) #20141127160613
(DB) INFO: SMRTA created #20141127160613
(DB) INFO: SMRTA~0 created #20141127160613
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMRTA has been successfully converted ( ignore SQL0150N )
(DB6) LOAD API is not used for table with small buffer
(DB6) Using ARRAY INSERT for table SMRTA
(IMP) INFO: import of SMRTA completed (7 rows) #20141127160613
(DB) INFO: SMSCMAID created #20141127160614
(DB) INFO: SMSCMAID~0 created #20141127160614
(DB) INFO: SMSCMAID~A01 created #20141127160614
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0150N The target fullselect, view, typed table, materialized query table, range-clustered table, or staging table in the INSERT, DELETE, UPDATE, MERGE, or TRUNCATE statement is a target for which the requested operation is not permitted. SQLSTATE=42807
(DB6) INFO: Virtual Table SMSCMAID has been successfully converted ( ignore SQL0150N )
(DB6) LOAD API is not used for table with small buffer
(DB6) Using ARRAY INSERT for table SMSCMAID
(DB6) [IBM][CLI Driver][DB2/LINUXX8664] SQL0803N One or more values in the INSERT statement, UPDATE statement, or foreign key update caused by a DELETE statement are not valid because the primary key, unique constraint or unique index identified by "2" constrains table "SAPUI5.SMSCMAID" from having duplicate values for the index key. SQLSTATE=01661
row=2
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: disconnected from DB
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
(STAT) DATABASE times: 91.359/2.981/0.198 72.3%/19.9%/18.2% real/usr/sys.
(STAT) FILE times: 34.928/12.027/0.891 27.7%/80.1%/81.8% real/usr/sys.
/usr/sap/UI5/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 2014112716061
Can anyone tell what could be the issue
hello all expert,
we are using crm ic and apc. but we get 'connection to apc lost' 'connection tp apc was losed by peer' when we request go though web dispatcher.
when we access to server directly then we do not have such a problem.
any one faced the same problem before? any hints will be appriciated.
Hello All,
We have CRM 7.4 installation.
I had Install the Desktop Connection add-on component CRMGWS 700: by using SAINT. Now I try to patch this component by:
CRMGWS 700: Support Package 0005.
I'm currently using a SAINT transaction in SAP Basis. The .SAR file is decompressed and a .PAT file is .../EPS/IN directory, The SANIT I had load package from Applican server.
but it is not listed on the screen for the add-on selection. As such, I cannot continue with the installation.
Any Idea how can I patch add-on on CRM?
Thanks for any advice.
Reza
Hi Experts,
Our SAP sever carry lot of unwanted SAP files. which are the unwanted file we can delete. it help us to free more space in the Server. i need you advice.
please tell me files and other unvwanted datas.
Regards
Sajmal