Hello,

We are running SAP ECC6 EHP5 on HP-UX 11.31 ia64, Unicode.

We are running a quiteold kernel : 720 patch 241, SAP has recommended us to update to the latest kernel available :

SAPEXEDB_600-20005247.SAR

SAPEXE_600-20005246.SAR

Unfortynalty after updating the kernel, the gateway crashes, and

therefore the sap system can not start at all.

This is the error we are having :

---------------------------------------------------

trc file: "dev_rd", trc level: 1, release: "720"

---------------------------------------------------

Tue Apr 29 17:50:41 2014

*** : Invalid next address [dpxxprf.c 1964]

***LOG S00=> GwInitReader, gateway started ( 1008) [gwxxrd.c 1757]

si_code = 2

Sending process ID = 0

Real user ID of sending process = 0

SEGV_ACCERR: Invalid permissions for mapped object

(nil) (Memory location which caused fault)

------------------ C-STACK ----------------------

(0) 0x40000000004914b0 CTrcStack2 + 0x1d0 at dptstack.c:228

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(1) 0x400000000068de90 SigIGenAction + 0x610 at sigux.c:1795

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(2) 0xe000000121a77440 ---- Signal 11 (SIGSEGV) delivered ----

(3) 0x4000000000794b90 $cold_strtolU16 + 0x250 at u16_tol.h:92

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(4) 0x400000000024e4a0 sapascsa_access + 0xc0 at sapscsa.c:194

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(5) 0x4000000000238570 rslgascsa + 0x30 at rslgwr1.c:1122

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(6) 0x40000000002529d0 rslginit + 0x230 at rslgwr1.c:1357

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(7) 0x400000000037cdc0 rslgwr1 + 0x70 at rslgwr1.c:1770

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(8) 0x4000000000373780 rslgwri2 + 0x410 at rslgwri2.c:207

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(9) 0x4000000000367840 DpSLogFun + 0x2c0 at dptrace.c:3930

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(10) 0x40000000003aa520 GwInitReader + 0x1630 at gwxxrd.c:1757

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(11) 0x40000000003a28d0 nlsui_main + 0x1b0 at gwxxrd.c:914

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(12) 0x4000000000235100 main + 0x80 at gwxxrd.c:857

[/usr/sap/JRQ/SYS/exe/run/gwrd]

(13) 0xc00000000004a9b0 main_opd_entry + 0x50 [/usr/lib/hpux64/dld.so]

-------------------------------------------------

***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c 1797]

We have tried the following without success :

Checked the permissions of /usr/sap/JRQ/SYS/exe/run/gwrd

Killed all remaining jrq processes including sapservices.

Clean all shared segment memory : cleanipc , ipcs commands show no remaining memory segments.

Run the command sappfpar, return no memory errors

We have managed to update the kernel of the preproduction system JRT, so does not seems that the kernel files are truncated or corrupted.

I could not find any sap note that corresponds to the errors mentioned above

Thanks and Regards

Hello,

For the moment I need to take some backups for a SAP system, however, I got the following questions:

- If I want to use DBACOCKPIT (DB13), Can I backup the files to disk? When schedulling I only got Device Type = Tape (R3DUMP0,1,2), I got the same problem with DB Logs.

- Do I need to backup also the other databases: MASTER, MSDB, TEMPDB, Model?

Regards,

JAM

Information:

-SQL Server 2012 SP1

-Windows Server 2008 R2

Hello,

I have performed a test with a certificate having one CN and one Subject Alternative Names and it worked well. However, I was wondering if SAP supports having more than one Subject Alternative Name.

Any comments?

Thank you!!

Maria Valdes

When running the TDMS transaction opens the bronwser the TDMS only when running the option system landscape, with the error below.

=============================================================================================================

Log transaction ST22

Category               ABAP Programming Error

Runtime Errors         SYNTAX_ERROR

Web Dynpro Component   BTP_LANDSCAPE_POWL

ABAP Program           /1BCWDY/07VOYC4ULRM0D7G14EPL==CP

Application Component  CA-EUR

Date and Time          29.04.2014 14:50:48

Short text

     Syntax error in program "/1BCWDY/07VOYC4ULRM0D7G14EPL==CP ".

What happened?

    Error in the ABAP Application Program

    The current ABAP program "CL_WDR_CLIENT_COMPONENT=======CP" had to be

     terminated because it has

    come across a statement that unfortunately cannot be executed.

    The following syntax error occurred in program

     "/1BCWDY/07VOYC4ULRM0D7G14EPL==CP " in include "/1BCWDY/B_07VOYC4ULRM0D7HV5EKN

     " in

    line 624:

    "O objeto de dados "LS_OBJECT_OVERVIEW" não possui componentes com o no"

    "me "STATUS_TIP". No entanto, existem os seguintes componentes c/nomes "

    "semelhantes: "STATUS_ICON" e "STATUS_SORT"."

    " "

    The include has been created and last changed by:

    Created by: "DDIC "

    Last changed by: "SOLMAN_ADMIN"

    Error in the ABAP Application Program

    The current ABAP program "CL_WDR_CLIENT_COMPONENT=======CP" had to be

     terminated because it has

    come across a statement that unfortunately cannot be executed.

      Web Dynpro Component          BTP_LANDSCAPE_POWL

      Controller                    COMPONENTCONTROLLER

What can you do?

    Please eliminate the error by performing a syntax check

    (or an extended program check) on the program "/1BCWDY/07VOYC4ULRM0D7G14EPL==CP

     ".

    You can also perform the syntax check from the ABAP Editor.

    If the problem persists, proceed as follows:

    Note down which actions and inputs caused the error.

Error analysis

    The following syntax error was found in the program

     /1BCWDY/07VOYC4ULRM0D7G14EPL==CP :

    "O objeto de dados "LS_OBJECT_OVERVIEW" não possui componentes com o no"

    "me "STATUS_TIP". No entanto, existem os seguintes componentes c/nomes "

    "semelhantes: "STATUS_ICON" e "STATUS_SORT"."

    " "

      Web Dynpro Component          BTP_LANDSCAPE_POWL

      Controller                    COMPONENTCONTROLLER

    To process the problem further, contact you SAP system

    administrator.

    Using Transaction ST22 for ABAP Dump Analysis, you can look

    at and manage termination messages, and you can also

    keep them for a long time.

Hallo all,

I need your help please,

my server NSP  is yellow, and it does not work,

and hier is dev_disp of NSP

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "720"

---------------------------------------------------

sysno      00

sid        NSP

systemid   562 (PC with Windows NT)

relno      7200

patchlevel 0

patchno    214

intno      20020600

make       multithreaded, Unicode, 64 bit, optimized

profile    \\Ibrahim-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibrahim-PC

pid        3376

kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)

length of sys_adm_ext is 588 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 3376) [dpxxdisp.c   1315]

  shared lib "dw_xml.dll" version 214 successfully loaded

  shared lib "dw_xtc.dll" version 214 successfully loaded

  shared lib "dw_stl.dll" version 214 successfully loaded

  shared lib "dw_gui.dll" version 214 successfully loaded

  shared lib "dw_mdm.dll" version 214 successfully loaded

  shared lib "dw_rndrt.dll" version 214 successfully loaded

  shared lib "dw_abp.dll" version 214 successfully loaded

  shared lib "dw_sym.dll" version 214 successfully loaded

  shared lib "dw_aci.dll" version 214 successfully loaded

rdisp/softcancel_sequence :  -> 0,5,-1

use internal message server connection to port 3900

Wed Apr 30 15:24:01 2014

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

Wed Apr 30 15:24:05 2014

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6423]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >Ibrahim-PC_NSP_00                       <

DpShMCreate: sizeof(wp_adm) 31696 (2264)

DpShMCreate: sizeof(tm_adm) 5517056 (27448)

DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

DpShMCreate: sizeof(appc_ca_adm) 64000 (64)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080

DpShMCreate: sizeof(comm_adm) 1384080 (2744)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm) 0 (296)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (80)

DpShMCreate: sizeof(vmc_adm) 0 (2152)

DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: sizeof(j2ee_adm) 3952

DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007BD0050, size: 7163600)

DpShMCreate: allocated sys_adm at 0000000007BD0060

DpShMCreate: allocated wp_adm_list at 0000000007BD3070

DpShMCreate: allocated wp_adm at 0000000007BD3260

DpShMCreate: allocated tm_adm_list at 0000000007BDAE40

DpShMCreate: allocated tm_adm at 0000000007BDAE90

DpShMCreate: allocated wp_ca_adm at 000000000811DDA0

DpShMCreate: allocated appc_ca_adm at 000000000812D7B0

DpShMCreate: allocated comm_adm at 000000000813D1C0

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 000000000828F060

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated gw_adm at 000000000828F110

DpShMCreate: allocated j2ee_adm at 000000000828F150

DpShMCreate: allocated ca_info at 00000000082900D0

DpShMCreate: allocated wall_adm at 0000000008290160

DpCommAttachTable: attached comm table (header=000000000813D1C0/ft=000000000813D1D0)

Wed Apr 30 15:24:06 2014

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (6 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> EsILock: use spinlock for locking

<ES> InitFreeList

<ES> block size is 4096 kByte.

<ES> Info: em/initial_size_MB( 8135MB) not multiple of em/blocksize_KB( 4096KB)

<ES> Info: em/initial_size_MB rounded up to 8136MB

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 2033 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 96 MB

DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE

MPI: dynamic quotas disabled.

MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

Wed Apr 30 15:24:08 2014

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c   1701]

Wed Apr 30 15:24:09 2014

***LOG Q0K=> DpMsAttach, mscon ( Ibrahim-PC) [dpxxdisp.c   12514]

MBUF state LOADING

DpStartStopMsg: send start message (myname is >Ibrahim-PC_NSP_00                       <)

DpStartStopMsg: start msg sent

CCMS uses Shared Memory Key 73 for monitoring.

CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.

CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.

Wed Apr 30 15:24:11 2014

CCMS: start to initalize 3.X shared alert area (first segment).

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]

MBUF state ACTIVE

DpWpBlksLow: max wp blocks in queue is 800 (80 %)

MBUF component UP

DpMsgProcess: 1 server in MBUF

DpAppcBlksLow: max appc blocks in queue is 500 (50 %)

Wed Apr 30 15:51:50 2014

DIA water mark reached (>30)

I am looking forward for your solutions,

Hi,

I am not able to install SAP Netweaver 7.0, I get the following error:

An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Path component contains reserved character (':'): C:). You can now:

Choose Retry to repeat the current step.

Choose View Log to get more information about the error.

Stop the option and continue with it later.

Can someone help me?

Hi All,

i have successfully installed a Trial version of SAP Netweaver 7.02 and GUI. Now some troubles  occur when i try to login using the SAP GUI. Now i see an error message: "Password logon nolonger possible - too many failed attempts". Have anyone got this problem? I tried to login with BCUSER(pwd: abcd1234), DDIC (Installer PW: 19920706) and SAP (Installer PW: 06071992)*

but all were unsuccesfull.

Thanks for any tips

Hello,

I have installed standalone JAVA system.

By mistake I applied the NW (ABAP + JAVA) license in Visual Admin. So under Software Products under Licensing Adapter Service, it now shows 3 software products viz. J2EE, Maintenance and NetWeaver.

I deleted all the licenses and reapplied only the J2EE license, but NetWeaver still appears under S/W products.

Is there any way to delete NetWeaver S/W product from licensing adapter?

Please suggest.

Regards,

Chintan

An import of the request was started on the wrong client. The import is canceled with the message "Client 100 does not exist. Choose another client". If I try to restart the import on the right client, I get the following error:

Import for request D01K900481 already running".

How can I solve this problem?

Can any share any best practice they followed with respect to checking transport dependency at a high level.

I know from SE09, we can set dependency from dependency information section under goto. I am looking for a more thorough process here.

Is there way using the project under TMS or is custom code the only way of achieving it. Any thoughts would be appreciated.

Regards

Kalyan

Hello everyone,

I'm instalalling a SAP NW BPC 10 and I have the following questions:

- I have followed the steps in the Installation Guide with success. However, My question is regarding EPM add-in. As I see it, this is a client tool for MS-office, which I think is installed in every user front-end. However, I've also check the EPM add-in Installagion guide and there are some steps on the netweaver:

" 3.5 Prerequisites for Installing EPM Add-in for Microsoft Office from SAP" (About running program UJ0_FILE_UPLOAD)

Is this step mandatory? or under which scenario?

Landscape:

NW 7.4 + BICONT + CPMBPC + POASBC (same system)

SQL Server 2012 SP1/Windows Server 2008 R2

No other SAP BusinessObjects product.

Regards,

JAM

Hi All,

I have load balancer under that multiple consumer server  and same for producer.

My question is While setting FPN connection do i need to import certificate of all consumer in all the producer ? or do i need to import certificate of all consumer in to producer load balancer system.

Why i am asking is because we got exception consumer side

com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unknown remote system alias.

Reason:          System Alias is not defined or permission denied for this user

Hi All,

We are not able to access our applications server through web dispatcher using HTTPS protocol(error page cannot be displayed), while it is working using http protocol.

we are getting the below error in dev_webdisp of SAP web dispatcher

[Thr 1092684096] Fri May  2 11:31:57 2014

[Thr 1092684096] *** ERROR => RoutePlgAttachToNewServer: IcrAttachToServer(192.168.8.45) for group PUBLIC: rc=4 [route_plg_mt 1144]

[Thr 1092684096] *** ERROR => RoutePlugInStartConn: RoutePlgAttachToNewServer(192.168.8.49): rc=-1 [route_plg_mt 587]

[Thr 1092684096] *** ERROR => IcmConnInitServer: PluginStartConn failed (rc=701) [icxxconn_mt. 1477]

we have already checked in the forum for solution and even tried updating the web dispatcher

We have done the web dispatcher checkconfig

qtyqty:wd0adm 68> sapwebdisp pf=WD0_W00_qtyqty -checkconfig -f strace -t 3
Checking SAP Web Dispatcher Configuration
=========================================
maximum number of sockets supported on this host: 32768
Server info will be retrieved from host: asapq00.qtyb.com:8100 with protocol: http
Checking connection to message server...OK
Retrieving server info from message server...OK
Message Server instance list
+---------------------+---------------------+---------+----------+
|    instance name    |    hostname         |HTTP port|HTTPS port|
+---------------------+---------------------+---------+----------+
|     asapq00_APQ_00 |  asapq00.qtyb.com |    8000 |          |
+---------------------+---------------------+---------+----------+
Checking ABAP servers with URL "/sap/public/icman/ping":
Checking ABAP server http://asapq00.qtyb.com:8000...OK
Checking J2EE servers with URL "/favicon.ico":
Checking J2EE server http://asapq00.qtyb.com:8000...OK

Retrieving group info with HTTP from server asapq00.qtyb.com:8000...OK
Defined server groups:
+---------------------+----------+
|     group name      | #entries |
+---------------------+----------+
|               !J2EE |       1  |
|               !DIAG |       1  |
|                !ALL |       1  |
|              PUBLIC |       1  |
+---------------------+----------+
Retrieving url info with HTTP from server asapq00.qtyb.com:8000...OK
Url map info file "/sap/public/icf_info/icr_urlprefix" is OK
Contents of url map file:
+---------------------+---------------------+--------------------+
|        URL          |        Group        |   virtual host     |
+---------------------+---------------------+--------------------+
|/sap/public/formgrap |                     |                *:*;|
|          /sap_java/ |                     |                *:*;|
|            /test30/ |                     |                *:*;|
|              /nwbc/ |                     |                *:*;|
|               /sap/ |                     |                *:*;|
+---------------------+---------------------+--------------------+

Check ended with 0 errors, 0 warnings

.

Please find the web dispatcher profile

SAPSYSTEMNAME = WD0
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = $(DIR_CT_RUN)
wdisp/shm_attach_mode = 6
#-----------------------------------------------------------------------
# Accesssability of Message Server
#-----------------------------------------------------------------------
rdisp/mshost = asapq00.qtyb.com
ms/http_port = 8100
ms/https_port = 8101
#-----------------------------------------------------------------------
# Configuration for medium scenario
#-----------------------------------------------------------------------
icm/max_conn               = 16350
icm/max_sockets            = 32768
wdisp/HTTPS/max_pooled_con = 16350
icm/req_queue_len          = 8000
icm/min_threads            = 100
icm/max_threads            = 500
mpi/total_size_MB          = 700
mpi/buffer_size            = 32768
mpi/max_pipes              = 21000

wdisp/HTTP/max_pooled_con  = 8192
wdisp/HTTPS/max_pooled_con = 8192
#-----------------------------------------------------------------------
# SAP Web Dispatcher Ports
#-----------------------------------------------------------------------
icm/server_port_0 = PROT=HTTP,PORT=80,EXTBIND=1
icm/server_port_1 = PROT=ROUTER,PORT=443,EXTBIND=1
#icm/host_name_full= asapq00.qtyb.com
icm/host_name_full= qtyqty.qty.co.in
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=/sapmnt/WD0/global/security/data/icmauth.txt
ssl/ssl_lib=/usr/sap/WD0/W00/sec/libsapcrypto.so
wdisp/HTTPS/dest_logon_group = PUBLIC
wdisp/HTTPS/max_client_ip_entries = 100000
wdisp/HTTPS/sticky_mask = 255.255.255.0
#-----------------------------------------------------------------------
#Additional Parameters
#-----------------------------------------------------------------------

wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/handle_webdisp_ap_header = 1

Regards,

Lalitha

Dear Experts,

Our client  SAP-PI 7.31 JAVA only server started displaying number of error message and I do have much hand in

BASIS activities since being a SAP-PI consultant. I tried searching the issue in forums but in vain..

Some of the error messages generated in Management Console are shown below.

1.JAVA Instance Task ABC shut down...

2.Server Cache 41per<50 perc average over 5 minutes below threshold  (22 values.)

3.JAVA Heap Memory 97%> 80 %  last value above threshold.

Could anyone suggest how to solve the issue?

Regards

Rebecca

Hi,

Please suggest, In service market place, where I can find release notes for J2EE core engine support pack  version 29?

Thanks & Regards

Sunil

Hi All,

I am trying to access nwa page of  CE server from java code and getting HTTP Status code 500.

I have  attached java class. Please let me to how to access this page.

Thank you

Hi Sriram,

Can you please tell me where to get the installation log..... I am new to SAP Basis...

I got one installation log under program files\instdir but that is not telling anything....

Even my installation is showing error 0, but getting stuck at step 16 - import ABAP

Regards

sudipta

Hello Friends,

I deleted the SAPLogonTicketKeypair from NWA and had taken a restart of JAVA server.

But now I am not able to open NWA page and other pages as well. I can see the start and login page but it shows blank page after login.

Please let me know if there is any alternate method to create the same.

As you already know that in SAP Netweaver 7.4 there is no Visual Admin tool .

Regards,

Kapil

Hi Experts,

     I have to make a HTTPS call to an external URL from the Netweaver AS java, so i'm using the destination API. I have created a http destination in nwa and have also created a view in NWA->Keys and Certificates and in that view, i have imported my certificate using 'Import entry'. The certificate is .crt file and i imported it as X509 certificate.

Now, in the http destination, i chosed the authentication as 'X509 Client Certificate with SSL' and chosed my view in the keystorage view, but the next dropdown Certificate is blank and my certificate is NOT listed in it.

Kindly let me know if i have missed anything or my understanding is wrong here. Or, is there any prerequisite for the certificate to be listed here?

Version: 7.31 SP10

Regards

Vijay.K

Hallo all,

I need your help please,

my server NSP  is yellow, and it does not work,

and hier is dev_disp of NSP

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "720"

---------------------------------------------------

sysno      00

sid        NSP

systemid   562 (PC with Windows NT)

relno      7200

patchlevel 0

patchno    214

intno      20020600

make       multithreaded, Unicode, 64 bit, optimized

profile    \\Ibrahim-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibrahim-PC

pid        3376

kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)

length of sys_adm_ext is 588 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 3376) [dpxxdisp.c   1315]

  shared lib "dw_xml.dll" version 214 successfully loaded

  shared lib "dw_xtc.dll" version 214 successfully loaded

  shared lib "dw_stl.dll" version 214 successfully loaded

  shared lib "dw_gui.dll" version 214 successfully loaded

  shared lib "dw_mdm.dll" version 214 successfully loaded

  shared lib "dw_rndrt.dll" version 214 successfully loaded

  shared lib "dw_abp.dll" version 214 successfully loaded

  shared lib "dw_sym.dll" version 214 successfully loaded

  shared lib "dw_aci.dll" version 214 successfully loaded

rdisp/softcancel_sequence :  -> 0,5,-1

use internal message server connection to port 3900

Wed Apr 30 15:24:01 2014

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

Wed Apr 30 15:24:05 2014

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6423]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >Ibrahim-PC_NSP_00                       <

DpShMCreate: sizeof(wp_adm) 31696 (2264)

DpShMCreate: sizeof(tm_adm) 5517056 (27448)

DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

DpShMCreate: sizeof(appc_ca_adm) 64000 (64)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080

DpShMCreate: sizeof(comm_adm) 1384080 (2744)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm) 0 (296)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (80)

DpShMCreate: sizeof(vmc_adm) 0 (2152)

DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: sizeof(j2ee_adm) 3952

DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007BD0050, size: 7163600)

DpShMCreate: allocated sys_adm at 0000000007BD0060

DpShMCreate: allocated wp_adm_list at 0000000007BD3070

DpShMCreate: allocated wp_adm at 0000000007BD3260

DpShMCreate: allocated tm_adm_list at 0000000007BDAE40

DpShMCreate: allocated tm_adm at 0000000007BDAE90

DpShMCreate: allocated wp_ca_adm at 000000000811DDA0

DpShMCreate: allocated appc_ca_adm at 000000000812D7B0

DpShMCreate: allocated comm_adm at 000000000813D1C0

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 000000000828F060

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated gw_adm at 000000000828F110

DpShMCreate: allocated j2ee_adm at 000000000828F150

DpShMCreate: allocated ca_info at 00000000082900D0

DpShMCreate: allocated wall_adm at 0000000008290160

DpCommAttachTable: attached comm table (header=000000000813D1C0/ft=000000000813D1D0)

Wed Apr 30 15:24:06 2014

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (6 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> EsILock: use spinlock for locking

<ES> InitFreeList

<ES> block size is 4096 kByte.

<ES> Info: em/initial_size_MB( 8135MB) not multiple of em/blocksize_KB( 4096KB)

<ES> Info: em/initial_size_MB rounded up to 8136MB

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 2033 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 96 MB

DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE

MPI: dynamic quotas disabled.

MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

Wed Apr 30 15:24:08 2014

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c   1701]

Wed Apr 30 15:24:09 2014

***LOG Q0K=> DpMsAttach, mscon ( Ibrahim-PC) [dpxxdisp.c   12514]

MBUF state LOADING

DpStartStopMsg: send start message (myname is >Ibrahim-PC_NSP_00                       <)

DpStartStopMsg: start msg sent

CCMS uses Shared Memory Key 73 for monitoring.

CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.

CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.

Wed Apr 30 15:24:11 2014

CCMS: start to initalize 3.X shared alert area (first segment).

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]

MBUF state ACTIVE

DpWpBlksLow: max wp blocks in queue is 800 (80 %)

MBUF component UP

DpMsgProcess: 1 server in MBUF

DpAppcBlksLow: max appc blocks in queue is 500 (50 %)

Wed Apr 30 15:51:50 2014

DIA water mark reached (>30)

I am looking forward for your solutions,