Hello,

I am trying to install TREX 7.1_62 on Linux server.

I put /sapmnt as my installation location in sapinst.

While installing TREX instance the installer is terminating with below log:

_install.log

Traceback (most recent call last):

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5013, in createLinked

    os.symlink(link[1], link[0])

OSError: [Errno 17] File exists

*******************************************************************************

Action: Creating directory structure for SAPSID D82, Instance 00 -- failed.

Exception description:

Traceback (most recent call last):

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 1340, in installInstance

    self.memberInstallStatus.doItOrNot(self.memberSarTrek.createdirs)

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5857, in doItOrNot

    step(*args, **keyArgs)

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 2542, in createdirs

    self.ds.createLinked()

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/setuplib.py", line 5016, in createLinked

    raise SetupException("failed to check/create link %s -> %s!" % (link[0], link[1]))

SetupException: >>>ERROR:failed to check/create link /usr/sap/D82 -> /sapmnt/D82!

*******************************************************************************

############ >>>ERROR:failed to check/create link /usr/sap/D82 -> /sapmnt/D82! - TREX setup cannot proceed.

Exception description:

Traceback (most recent call last):

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 3562, in main

    Installer().mainTrexAction()

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 703, in mainTrexAction

    self.installInstance(step)

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 1379, in installInstance

    framework.error(str(e) + " - TREX setup cannot proceed.")

  File "/sapsw/TREX_71_62/tx_trex_content/TX_LINUX_X86_64/support/_install.py", line 3472, in error

    raise ErrorException(self.errorMarker + text,result=1)

ErrorException: <__main__.ErrorException instance at 0x7f4cfda6bd88>

*******************************************************************************

*                   ===  Script execution resumee  ===                        *

* Step 1: Preparation and checks before TREX system installation      : SUCCESS

* Step 2: TREX system installation                                    : FAILED

* Script execution terminated at 2015-04-03_08.33.35 with error 1

*******************************************************************************

I tried to use other locations like /usr/sap/D82 as installation location, inthat case it tries to create link like

/usr/sap/D82/D82 --> /usr/sap/D82

My server has /sapnt/D82 and /usr/sap/D82 as separate mount points.

/dev/mapper/vg_dd82-lvusapd82_3

                       47G  1.1G   46G   3% /usr/sap/D82

/dev/mapper/vg_dd82-lvusapd82_4

                      4.7G  139M  4.6G   3% /usr/sap/SMD/SMDA90

itsusravmdd05.jnj.com:/vol/itsusravmdd05_btb/btb_fsrf_sapmnt_d82

                       25G     0   25G   0% /sapmnt/D82

I dont understand why installer is trying to create a softlink between

/sapmnt/D82 and /usr/sap/D82

Please share any information you guys are having.

Thanks & Regards,

Tejas

Hello Team,

We are planning to archive messages from our PI System. We would like to know, what data will be deleted from the Archive object BC_XMB, Is the data from this object important? If not, we can simply delete the data from system to reduce the DB growth, if not we will implement the archiving plan.

Thanks & Regards,

C V Jayachandra

Hello Guys,

Can some one suggest me to download the IDES system for practising by providing the link or notes. I would like to make as test system to perform the  project activities like upgrade support package to the latest release , kernel upgrade , STMS etc.

Please suggest whether any trail version of any would help.

Thanks,

Pravmishra

Dear Experts

          i have configured ADS,SSO,SLD on Portal but i have not able to login to Portal with Standard user J2EE_ADM_SID i have not created any other user in that we are working on EP 7.3

Kindly give me some suggestions

Regards

F  [Thr 140737354041184] *** LOG => connected to Enqueue Server.

F  [Thr 140737354041184] *** LOG => connected to Message Server.

F  [Thr 140737354041184] *** LOG => Starting run level 1.

F  ********************************************************************************

F  Java process [deployment] properties:

F    section name     : deployment

F    config file      : /usr/sap/HPD/J00/exe/startup.properties

F    node name        : Deploy_offline

F    home directory   : /usr/sap/HPD/J00/j2ee/cluster

F    shutdown timeout : 136000 ms

F    exit timeout     : 7000 ms

F    debuggable       : false

F    debugger active  : false

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Starting nodes: runlevel 1.

F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/jstart

F    arg[ 1] = -nodeId=0

F    arg[ 2] = pf=/usr/sap/HPD/SYS/profile/HPD_J00_accsdevep1

F    arg[ 3] = -hostvm

F    arg[ 4] = -nodeName=deployment

F    arg[ 5] = -file=/usr/sap/HPD/J00/exe/startup.properties

F    arg[ 6] = -jvmFile=/usr/sap/HPD/J00/work/jstart.jvm

F    arg[ 7] = -traceFile=/usr/sap/HPD/J00/work/dev_deployment

F    arg[ 8] = -javaOutFile=/usr/sap/HPD/J00/work/jvm_deployment.out

F  exePath : PATH=/usr/sap/HPD/J00/exe/sapjvm_6/bin:/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64/server:/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64:/usr/sap/HPD/J00/j2ee/os_libs:/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_deployment.out

F  stderr  : /usr/sap/HPD/J00/work/std_deployment.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process Deploy_offline started with pid 1885

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process deployment started (pid 1885).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:47 2015

F  [Thr 140737354041184] *** LOG => Process deployment stopping (pid 1885).

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process deployment stopped (pid 1885).

F  [Thr 140737354041184] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Run level 1 completed.

F  [Thr 140737354041184] *** LOG => Starting run level 2.

F  ********************************************************************************

F  Java process [bootstrap] properties:

F    section name     : bootstrap

F    config file      : /usr/sap/HPD/J00/exe/startup.properties

F    node name        : Instance_bootstrap

F    home directory   : /usr/sap/HPD/J00/j2ee/cluster

F    shutdown timeout : 136000 ms

F    exit timeout     : 7000 ms

F    debuggable       : false

F    debugger active  : false

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Starting nodes: runlevel 2.

F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/jstart

F    arg[ 1] = -nodeId=0

F    arg[ 2] = pf=/usr/sap/HPD/SYS/profile/HPD_J00_accsdevep1

F    arg[ 3] = -hostvm

F    arg[ 4] = -nodeName=bootstrap

F    arg[ 5] = -file=/usr/sap/HPD/J00/exe/startup.properties

F    arg[ 6] = -jvmFile=/usr/sap/HPD/J00/work/jstart.jvm

F    arg[ 7] = -traceFile=/usr/sap/HPD/J00/work/dev_bootstrap

F    arg[ 8] = -javaOutFile=/usr/sap/HPD/J00/work/jvm_bootstrap.out

F  exePath : PATH=/usr/sap/HPD/J00/exe/sapjvm_6/bin:/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64/server:/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64:/usr/sap/HPD/J00/j2ee/os_libs:/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_bootstrap.out

F  stderr  : /usr/sap/HPD/J00/work/std_bootstrap.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process Instance_bootstrap started with pid 1923

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process bootstrap started (pid 1923).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:53 2015

F  [Thr 140737354041184] *** LOG => Process bootstrap running (pid 1923).

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:54 2015

F  [Thr 140737354041184] *** LOG => Process bootstrap stopping (pid 1923).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:55 2015

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process bootstrap stopped (pid 1923).

F  [Thr 140737354041184] *** WARNING => Node bootstrap failed: result 1, exit code 538. [sfxxnode.hpp 1024]

F  *******************************************************************F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/sapcontrol

F    arg[ 1] = -prot

F    arg[ 2] = PIPE

F    arg[ 3] = -nr

F    arg[ 4] = 00

F    arg[ 5] = -function

F    arg[ 6] = CreateSnapshot

F    arg[ 7] = Servercrash

F    arg[ 8] = postmortem?node=bootstrap&exitcode=538

F    arg[ 9] = 1

F    arg[10] = 10000

F    arg[11] = ""

F    arg[12] = ""

F    arg[13] = DEFAULT

F  exePath : PATH=/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_snapshot.out

F  stderr  : /usr/sap/HPD/J00/work/std_snapshot.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process snapshot started with pid 2785

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process snapshot started (pid 2785).

F  [Thr 140737354041184] *** LOG => Process snapshot running (pid 2785).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:58 2015

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process snapshot stopped (pid 2785).

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Run level 2 completed.

F  [Thr 140737354041184] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).

I  [Thr 140737354041184] MPI: dynamic quotas disabled.

I  [Thr 140737354041184] MPI init: pipes=4000 bu

Environment: HP -UX Oracle 11g

I performed a system restore on PI dual stack system using backup restore method

I created the control file from source system DB is up and running listener is up and running as well but the SAP application is not able to make connection with the DB

I am attaching the Trans.log file and the result of startsap command on console:

Help is appreciated-

------------------------------

startsap

Checking <SID> Database

Database is not available via R3trans

-------------------------------------------

Trying to start <SID> database ...

Log file: /home/<SID>adm/startdb.log

Starting Startup Agent sapstartsrv

OK

Instance Service on host <hostname> started

-------------------------------------------

starting SAP Instance SCS12

Startup-Log is written to /home/<SID>adm/startsap_SCS12.log

-------------------------------------------

/usr/sap/<SID>/SCS12/exe/sapcontrol -prot NI_HTTP -nr 12 -function Start

Instance on host <hostname> started

Starting Startup Agent sapstartsrv

OK

Instance Service on host <hostname> started

-------------------------------------------

starting SAP Instance ASCS11

Startup-Log is written to /home/<SID>adm/startsap_ASCS11.log

-------------------------------------------

/usr/sap/<SID>/ASCS11/exe/sapcontrol -prot NI_HTTP -nr 11 -function Start

Instance on host <hostname> started

Starting Startup Agent sapstartsrv

OK

Instance Service on host <hostname> started

-------------------------------------------

starting SAP Instance DVEBMGS10

Startup-Log is written to /home/<SID>adm/startsap_DVEBMGS10.log

-------------------------------------------

/usr/sap/<SID>/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Start

Instance on host <hostname> started

---------------------------------

<hostname>:<SID>adm 28> R3trans -d

This is R3trans version 6.24 (release 721 - 26.09.13 - 20:13:07 ).

unicode enabled version

2EETW169 no connect possible: "DBMS = ORACLE                          --- dbs_ora_tnsname = '<SID>'"

R3trans finished (0012).

--------------------------------

After reviewing trans.log do I have to do SSFS configuration

---------------------------------

Regards,

APS

Hello everyone,

we have a system composed in this way:

- one DB instance + CI instance

- more AS

We are testing the daily backup using veeam.

When the backup finish there are some problem.

It seems that the servers freeze for a short period and so we receive some DUMP due to broken connectio, some error that the AS don't reah the cerntral lock handler, and there are some broken transaction (transaction SM13).

We have discovered that the problem is due to the snaphot removal and consolidation.

In fact the problem is the snapshot removal/consolidation on vmware. We have tried to do a snapshot and after that to remove it and we have the same behavior.

Do you know if is it possible to solve this problem?

We wish to do a veeam backup daily, but with this problem it is not a good choice.

Thank you in advance for your help.

Regards

Matteo Stocco

Dear

we have requirement to restart the server so we restart whole server and when we try to start all things are started but web dispather not getting started

I will send you the screen we are on aix 6.1

Kindly suggest where i am going wrong

Regards

Rajendra

Hello All,

Reg EWA report I have few clarifications for which I am not able to find a concrete solution, so seeking some expert advise from the community.

Hardware capacity Analysis.

Not getting usage regarding the CPU Utilisation, I am getting info about the number of CPU's CPU info model etc but utilization data I am not getting.

I have checked the note 1309499 - Hardware Capacity Analysis in SAP Services.

All the criterias are fulfilled SAP OScol, SAP Host agent, ST06/OS07 I am able to see all the data.

Attached screen shots from the report

My H/w is IBM Power VM with Shared processor LPAR as per the above note, it says PUA should be enabled for my machine type, but strange thing is for the other SAP server of the same H/w specs I am getting the CPU util data in H/w capacity, so can you let me know if anybody of you have faced a similar issue and what needs to be enabled to get the CPU Util data in EWA report.

Solman version 7.1 SP 08 Managed system infor SAP NW 7.4 SP 05

OS/DB - AIX 6.1/Oracle 11.2.0.4

Also I am not getting the rating for Overal section Database server load from expensive SQL statements, whereas for the table Load from Expensive SQL stsmts I am getting the rating, it is not reflected in the overall rating.

Already checked the note  551646 and no clue related to my issue.

Also for DVM is it necessary to have ST 7.1 SP 12 or higher?

I am not able to get the data for that section too.

Let me know how the data is collected and how to troubleshoot here.

Please help.

How can I enable CCMS monitoring for Business Connecter. Im using 4.7.

/Teddy.

Hello all,

I want to start the WebDispacher ( NW 7.0 EhP3, Java system)

The Error is:

3> startsap all X01

Trying to start SID database ...

Log file: /home/sidadm/startdb.log

Starting Startup Agent sapstartsrv

OK

Instance Service on host sid started

-------------------------------------------

starting SAP Instance X01

Startup-Log is written to /home/sidadm/startsap_X01.log

-------------------------------------------

/usr/sap/SID/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 01 -function Start

startup of Instance failed

See /home/sidadm/startsap_X01.log for details

<sid>dm 74> ./sapcontrol -prot NI_HTTP -nr 01 -function Stop

08.04.2015 06:02:58

Stop

FAIL: HTTP error, HTTP/1.1 401 Unauthorized

/usr/sap/<SID>/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 01 -function Start

08.04.2015 05:32:52

Start

FAIL: HTTP error, HTTP/1.1 401 Unauthorized

-------------------------------------------

05:33:02

startup of Instance failed

What I tried and didnt work: stop sap instance, kill web dispacher process.

The webdispacher profile looks like this:

SAPSYSTEMNAME = sapsid

SAPSYSTEM = 01

# Message Server Description

rdisp/mshost=hostname

#ms_http_port=3900

ms/http_port  = 3900

# SAP Web Dispatcher Parameters

wdisp/auto_refresh  = 120

wdisp/max_servers  = 100

# Directory variables

DIR_EXECUTABLE = $(DIR_INSTANCE)/exe

DIR_INSTANCE = /usr/sap/SID/SCS00/work

# Description of the Access Points

#icm/server_port_0 = PROT=HTTP , PORT=8$ (SAPSYSTEM) 00, TIMEOUT=60 , PROCTIMEOUT=600

icm/server_port_0  = PROT=HTTP,PORT=80

icm/server_port_1  = PROT=ROUTER,PORT=443

# Description of the Resources

icm/min_threads  = 20

icm/max_threads  = 40

icm/max_conn  = 500

# Communication Buffer

mpi/total_size_MB  = 100

mpi/buffer_size  = 65536

# Parameters for the HTTPS Routing

wdisp/HTTPS/dest_logon_group  = HTTPS

wdisp/HTTPS/max_client_ip_entries   = 100000

wdisp/HTTPS/sticky_mask             = 255.255.255.0

Can you pls advise me.

Thx

Chris

Short text

    Process terminated by signal 11.

What happened?

    Error in the SAP kernel.

    The current ABAP "SAPLSVSM" program had to be terminated because the

    ABAP processor detected an internal system error.

Error analysis

    An R/3 System process was terminated by an operating system signal.

    -

    Possible reasons for this are:

    1. Internal system error.

    2. Process was terminated externally (by the system administrator).

       -

    Last error logged in SAP kernel

    Component............ "NI (network interface)"

    Place................ "SAP-Dispatche****** on host ****"

    Version.............. 40

    Error code........... "-6"

    Error text........... "connection to partner '127.0.0.1:0' broken"

    Description.......... "NiIRead: 127.0.0.1:0"

    System call.......... "recv"

    Module............... "nixxi.cpp"

    Line................. 4849

    The error reported by the operating system is:

    Error number..... " "

    Error text....... " "

System environment

    SAP-Release " "

    Application server... "*****"

    Network address...... "*****"

    Operating system..... "Linux"

    Release.............. "3.0.101-0.46-default"

    Hardware type........ "x86_64"

    Character length.... 16 Bits

    Pointer length....... 64 Bits

    Work process number.. 31

    Shortdump setting.... "full"

    Database server... "******"

    Database type..... "DB6"

    Database name..... "PEC"

    Database user ID.. "SAPSR3"

    Terminal.......... "*****"

    Char.set.... "C"

    SAP kernel....... 721

    created (date)... "Dec 4 2013 12:39:33"

    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr131018"

    Database version. "DB6_81 "

    Patch level. 201

    Patch text.. " "

    Database............. "DB6 09.07.*, DB6 09.08.*, DB6 10.*"

    SAP database version. 721

    Operating system..... "Linux 2.6, Linux 3"

    Memory consumption

    Roll.... 0

    EM...... 20949000

    Heap.... 0

    Page.... 1163264

    MM Used. 4755120

    MM Free. 3621632

Information on where terminated

    Termination occurred in the ABAP program "SAPLSVSM" - in

     "VRM_QUEUE_FLUSH_SIGNATURE".

    The main program was "SAPMV45A ".

    In the source code you have the termination point in line 65

    of the (Include) program "LSVSMU07".

Error occurred during batch input processing

Active Calls in SAP Kernel

Lines of C Stack in Kernel (Structure Differs on Each Platform)

(LinStack+0x33)[0x5ec752]

(CTrcStack2+0x48)[0x5ece5c]

(_ZL16rabax_CStackSavev+0xc6)[0x76c81f]

(ab_rabax+0x27ea)[0x772c58]

(ab_CoreInfo+0xc6)[0x775860]

(ThrCoreInfo+0x9)[0x5a75a6]

(ThIErrHandle+0xf3f)[0x4a05b9]

(ThSigHandler+0xdb)[0x4dc16a]

(SigIGenAction+0x2da)[0x1422b8a]

/lib64/libpthread.so.0[0x7f0b8e636850]

(_ZL20ScanBaseRefsCallbackP8BaseAttaP10AB_DATASEGjjtjPKv+0x3c)[0x18d61dc]

(_Z11ab_ScanBasePFvP8BaseAttaP10AB_DATASEGjjtjPKvES4_+0xc8)[0x1776928]

(_ZL19gcInitializeRootSet8GC_MODUSP19SzkAlgTraverseGraph+0xcd)[0x18d8cbd]

(ab_ObjMgrPerformGCStep__+0x3a3)[0x18c0e43]

(_Z8ab_jloopv+0x663)[0x19569f3]

(_Z8ab_extriv+0x59e)[0x1758a9e]

(_Z9ab_xeventPKDs+0x23)[0x179b873]

(ab_dstep+0xfa)[0x17b945a]

(dynpctlcal+0x29a)[0x1642cba]

(dynpout0+0xe8)[0x166eac8]

(dynprctl+0x135)[0x1643ef5]

(dynpen00+0x7a8)[0x1638128]

(ThSoftCancel+0xbeb)[0x505e50]

(ThCleanPrevUser+0x529)[0x4a3311]

(ThCheckPrevUser+0x1d7)[0x4a39cc]

(TskhLoop+0x4df3)[0x15b5f13]

(ThStart+0x25e)[0x4aaa29]

(DpMain+0x395)[0x1566945]

/lib64/libc.so.6(__libc_start_main+0xe6)[0x7f0b8e2ccc36]

Internal notes

    The termination was triggered in function "ab_CoreInfo"

    of the SAP kernel, in line 8945 of the module

     "//bas/721_REL/src/krn/runt/abrabax.c#9".

    The internal operation just processed is "CALY".

    Internal mode was started at 20150331132215.

    Stack trace of 'core'.

Hi,

We are required to perform a SAP hardware migration and upgrade oracle database to 11g.

Current environment is a distributed installation with CI and DB on seperate hosts. Both host have the same OS version.

Our landscape consist of ECC 6.0 / PI 7.0 / BW 7.0/ SOLMAN 7.1 . All these instance are on seperate hosts.

Current environemnt:

OS - RHEL 5.4

DB - Oracle 10.2.0.4

DB Hardware - Sun Blade X6240

CI (Application server hardware) - Sun Blade X6240

Desired target environment:

OS - RHEL 5.4

DB - Oracle 11.2.0.3

DB Hardware - HP (model N/A)

CI (Application server hardware) - V-Block (Virtual environment)

I am thinking of the following approach :

1. Homogeneous system copy with DB restore method to setup the target system

2. Upgrade Oracle to 11.2.0.3

3. Setup oracle log shipping from the current producitve environemnt to the newly created target system until cutover.

4. During cutover change the IP and hostname of the newly created target to that of the current production application server.

Is this a good approach  ?

Or is there a better way to achieve this ?

Thanks

LM

Message was edited by: L M

Hello Folks - often I run into situations (especially when BW is involved) where various users like ALEREMOTE or similar users are getting locked due to too many incorrect logon attempts.  If I know from where (could be within the system or some external SAP system) it is that is calling into this system w/ the wrong pwd, I can fix it.  But it gets tricky when I don't.  I know to scour ST22/SM21 to look for clues but do not think those will give information on which (external) system for sure is calling in and locking the user.

I am aware ST01 gives you opportunity to turn on a trace but not sure that is the best way to solve these situations.  Appreciate any tips you can share.  Thanks

Hello all,

Do you know what Kernel to use for WeDispatcher 720?

thx

Chris

F  [Thr 140737354041184] *** LOG => connected to Enqueue Server.

F  [Thr 140737354041184] *** LOG => connected to Message Server.

F  [Thr 140737354041184] *** LOG => Starting run level 1.

F  ********************************************************************************

F  Java process [deployment] properties:

F    section name     : deployment

F    config file      : /usr/sap/HPD/J00/exe/startup.properties

F    node name        : Deploy_offline

F    home directory   : /usr/sap/HPD/J00/j2ee/cluster

F    shutdown timeout : 136000 ms

F    exit timeout     : 7000 ms

F    debuggable       : false

F    debugger active  : false

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Starting nodes: runlevel 1.

F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/jstart

F    arg[ 1] = -nodeId=0

F    arg[ 2] = pf=/usr/sap/HPD/SYS/profile/HPD_J00_accsdevep1

F    arg[ 3] = -hostvm

F    arg[ 4] = -nodeName=deployment

F    arg[ 5] = -file=/usr/sap/HPD/J00/exe/startup.properties

F    arg[ 6] = -jvmFile=/usr/sap/HPD/J00/work/jstart.jvm

F    arg[ 7] = -traceFile=/usr/sap/HPD/J00/work/dev_deployment

F    arg[ 8] = -javaOutFile=/usr/sap/HPD/J00/work/jvm_deployment.out

F  exePath : PATH=/usr/sap/HPD/J00/exe/sapjvm_6/bin:/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64/server:/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64:/usr/sap/HPD/J00/j2ee/os_libs:/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_deployment.out

F  stderr  : /usr/sap/HPD/J00/work/std_deployment.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process Deploy_offline started with pid 1885

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process deployment started (pid 1885).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:47 2015

F  [Thr 140737354041184] *** LOG => Process deployment stopping (pid 1885).

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process deployment stopped (pid 1885).

F  [Thr 140737354041184] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Run level 1 completed.

F  [Thr 140737354041184] *** LOG => Starting run level 2.

F  ********************************************************************************

F  Java process [bootstrap] properties:

F    section name     : bootstrap

F    config file      : /usr/sap/HPD/J00/exe/startup.properties

F    node name        : Instance_bootstrap

F    home directory   : /usr/sap/HPD/J00/j2ee/cluster

F    shutdown timeout : 136000 ms

F    exit timeout     : 7000 ms

F    debuggable       : false

F    debugger active  : false

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Starting nodes: runlevel 2.

F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/jstart

F    arg[ 1] = -nodeId=0

F    arg[ 2] = pf=/usr/sap/HPD/SYS/profile/HPD_J00_accsdevep1

F    arg[ 3] = -hostvm

F    arg[ 4] = -nodeName=bootstrap

F    arg[ 5] = -file=/usr/sap/HPD/J00/exe/startup.properties

F    arg[ 6] = -jvmFile=/usr/sap/HPD/J00/work/jstart.jvm

F    arg[ 7] = -traceFile=/usr/sap/HPD/J00/work/dev_bootstrap

F    arg[ 8] = -javaOutFile=/usr/sap/HPD/J00/work/jvm_bootstrap.out

F  exePath : PATH=/usr/sap/HPD/J00/exe/sapjvm_6/bin:/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64/server:/usr/sap/HPD/J00/exe/sapjvm_6/jre/lib/amd64:/usr/sap/HPD/J00/j2ee/os_libs:/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_bootstrap.out

F  stderr  : /usr/sap/HPD/J00/work/std_bootstrap.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process Instance_bootstrap started with pid 1923

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process bootstrap started (pid 1923).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:53 2015

F  [Thr 140737354041184] *** LOG => Process bootstrap running (pid 1923).

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:54 2015

F  [Thr 140737354041184] *** LOG => Process bootstrap stopping (pid 1923).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:55 2015

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process bootstrap stopped (pid 1923).

F  [Thr 140737354041184] *** WARNING => Node bootstrap failed: result 1, exit code 538. [sfxxnode.hpp 1024]

F  *******************************************************************F  ********************************************************************************

F  Starting process: /usr/sap/HPD/J00/exe/sapcontrol

F    arg[ 1] = -prot

F    arg[ 2] = PIPE

F    arg[ 3] = -nr

F    arg[ 4] = 00

F    arg[ 5] = -function

F    arg[ 6] = CreateSnapshot

F    arg[ 7] = Servercrash

F    arg[ 8] = postmortem?node=bootstrap&exitcode=538

F    arg[ 9] = 1

F    arg[10] = 10000

F    arg[11] = ""

F    arg[12] = ""

F    arg[13] = DEFAULT

F  exePath : PATH=/usr/sap/HPD/J00/exe:/sybase/HPD/ASE-15_0/jobscheduler/bin:/sybase/HPD/ASE-15_0/bin:/sybase/HPD/ASE-15_0/install:/sybase/HPD/OCS-15_0/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/sap/HPD/SYS/exe/uc/linuxx86_64:/usr/sap/HPD/SYS/exe/run:/home:.

F  libPath : LD_LIBRARY_PATH=/usr/sap/HPD/J00/exe:/usr/sap/HPD/SYS/global/syb/linuxx86_64/sybodbc:/sybase/HPD/ASE-15_0/lib:/sybase/HPD/OCS-15_0/lib:/sybase/HPD/OCS-15_0/lib3p64:/sybase/HPD/OCS-15_0/lib3p:/usr/sap/HPD/SYS/exe/run:/usr/sap/HPD/SYS/exe/uc/linuxx86_64

F  stdout  : /usr/sap/HPD/J00/work/std_snapshot.out

F  stderr  : /usr/sap/HPD/J00/work/std_snapshot.out

F  console : no

F  debugger: no

F  nice    : no

F  ********************************************************************************

F  Process snapshot started with pid 2785

F  ********************************************************************************

F  [Thr 140737354041184] *** LOG => Process snapshot started (pid 2785).

F  [Thr 140737354041184] *** LOG => Process snapshot running (pid 2785).

F 

F [Thr 140737354041184] Tue Apr  7 17:51:58 2015

F  [Thr 140737354041184] *** LOG => Signal 17 SIGCHLD.

F  [Thr 140737354041184] *** LOG => Process snapshot stopped (pid 2785).

F  [Thr 140737354041184] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).

F  [Thr 140737354041184] *** LOG => Run level 2 completed.

F  [Thr 140737354041184] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).

I  [Thr 140737354041184] MPI: dynamic quotas disabled.

I  [Thr 140737354041184] MPI init: pipes=4000 bu

Hi

Sometimes our system takes a lot of strain from users running long CPU intensive jobs. How does one find out what is the acceptable response time for your Production system e.g. what transaction can I run to check it and how can you determine the response time at peak times for instance to compare it to your baseline/acceptable response time?

Thanks, Adrian

Hi everyobdy, we are having a special need from our PM team

They need that ERP send an email immediately at the moment when an alert is generated

Send job in scot tc is scheduled each 2 minutes but this is not enough for them, we don't want to launch every 30 sec or something like that the job because it will generate a large log queue in sm37

Is there any way to launch RSCONN01 program every time alert is generated in ERP?

I have searched in forum but everybody talks about ABAP code, transaction is standard so should we modify it to launch mail program and immediately send mail?

thanks

We are installing SAP.EHP.ERP.6.0 using Oracle database 11g2.

We are facing this issue in the IMPORT ABAP Phase.

import_monitor.java:

java version "1.6.0_71"

Java(TM) SE Runtime Environment (build 6.1.062)

Loading of 'E071K' import package: ERROR

Import Monitor jobs: running 2, waiting 1, completed 139, failed 1, total 143.

Loading of 'REPOSRC' import package: ERROR

Import Monitor jobs: running 1, waiting 1, completed 139, failed 2, total 143.

Loading of 'D010TAB' import package: ERROR

Import Monitor jobs: running 0, waiting 1, completed 139, failed 3, total 143

Import_monitor.log
ERROR: 2015-04-27 06:39:12 com.sap.inst.migmon.LoadTask run

Loading of 'D010TAB' import package is interrupted with R3load error.

Process 'D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe -i D010TAB.cmd -dbcodepage 4103 -l D010TAB.log -stop_on_error' exited with return code 2.

For mode details see 'D010TAB.log' file.

Standard error output:

sapparam: sapargv(argc, argv) has not been called!

sapparam(1c): No Profile used.

sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

WARNING: 2015-04-27 06:39:33

Cannot start import of packages with views because not all import packages with tables are loaded successfully.

WARNING: 2015-04-27 06:39:33

3 error(s) during processing of package.

E071k.log

(TSK) ERROR: file <C:\Program Files\sapinst_instdir\BS2011\ERP606\AS-ABAP\ORA\CENTRAL\E071K.TSK.bck> already seems to exist

             a previous run may not have been finished cleanly

             file <C:\Program Files\sapinst_instdir\BS2011\ERP606\AS-ABAP\ORA\CENTRAL\E071K.TSK> possibly corrupted

[4/27/2015 12:26 PM] Akshay Patil:

D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)

D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20150427051621

D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20150427055917

D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP

D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]

Compiled Oct 20 2010 02:35:52

D:\usr\sap\AV1\SYS\exe\uc\NTAMD64\R3load.exe -i E071K.cmd -dbcodepage 4103 -l E071K.log -stop_on_error

DbSl Trace: CONNECT failed with sql error '12541'

(DB) ERROR: db_connect rc = 256

DbSl Trace: CONNECT failed with sql error '12541'

PLEASE HELP RESOLVING THIS ISSUE

Thank you

Hi experts,

I am not able to connect to my sap system, i have the following error:

what can i do to correct this problem?

Thanks.

Amine