SCN (SAP Community Network) regularly receives the question: how can be files downloaded from the R/3 server via transaction AL11?

Unfortunately there are no standard transactions or reports which could provide such functionality, but there are some "workarounds" which can help with that.
Let's not forget: transaction AL11 just shows the files available on the server, therefore the "workarounds" are simple: let's look for programs which allow downloading files from the server to the front end!

The following chart shows a simplified flow how you can find the ideal download tool - then you can read further information below.

Point 1 - First you need to find out whether component EA-APPL is installed on the SAP system.

This component provides some ready-to-use tools which you can use to easily download files.

The easy way to find this out is to go to menu System -> Status... in any window, then select button "Component information". If EA-APPL is installed, you can see it in the appearing list.

You can see an example here:

The "hard way" is to go to transaction SPAM and press button Package level. You can see EA-APPL here too if it is installed.

For example:

Point 2 - Use transaction CG3Y.

This transaction is easy to use: you just need to enter the path of the required file and the path where the file should be downloaded to the front end. Simple as that! Here is an example:

Point 3 - Use program CACS_FILE_COPY.

You can start it via transaction SE38 or SE80. In the program you can select "Applicn on Presentation Server", and set the Source and Target Files.

E.g.:

Point 4 - Download the file as a simple list.

When you open the file in transaction AL11, you can download it as a simple list via menu System -> List -> Save -> Local file (see the following image).

You can select "unconverted" to save the data as a regular file, or "spreadsheet" to save the data which can be used in Excel.

Point 5 - Problem: downloaded files are truncated.

When you save the file with the method from Point 4, it may happen that the files are truncated.

Read Wiki http://wiki.scn.sap.com/wiki/x/LIH-FQ for the solution.

Point 6 - Use function module ARCHIVFILE_SERVER_TO_CLIENT.

This is an unreleased function module which can be started from transaction SE37. Since this function module was intended for SAP-internal purposes, results may vary.

Starting ARCHIVFILE_SERVER_TO_CLIENT via testing in transaction SE37 looks like this:

Point 7 - Write your own program on OS level.
Unfortunately this point lies far outside the boundaries of this guide: this solution depends on the OS editions, used network protocol, firewall/security settings, etc.
This guide can't help here - however, the other Spaces on SCN might be a good place to start to collect ideas.

Happy hunting!

Please find below my dev_w0 log

---------------------------------------------------

trc file: "dev_w0", trc level: 1, release: "700"

---------------------------------------------------

*

*  ACTIVE TRACE LEVEL           1

*  ACTIVE TRACE COMPONENTS      all, MJ

*

B 

B Fri Jun 13 23:52:39 2014

B  create_con (con_name=R/3)

B  Loading DB library 'F:\usr\sap\PRD\DVEBMGS00\exe\dboraslib.dll' ...

B  Library 'F:\usr\sap\PRD\DVEBMGS00\exe\dboraslib.dll' loaded

B  Version of 'F:\usr\sap\PRD\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.144)

B  New connection 0 created

M sysno      00

M sid        PRD

M systemid   562 (PC with Windows NT)

M relno      7000

M patchlevel 0

M patchno    144

M intno      20050900

M make:      multithreaded, Unicode, 64 bit, optimized

M pid        1180

M

M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)

M  length of sys_adm_ext is 576 bytes

M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1180) [dpxxdisp.c   1305]

I  MtxInit: 30000 0 0

M  DpSysAdmExtCreate: ABAP is active

M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M  DpShMCreate: sizeof(wp_adm)        25168    (1480)

M  DpShMCreate: sizeof(tm_adm)        5652128    (28120)

M  DpShMCreate: sizeof(wp_ca_adm)        24000    (80)

M  DpShMCreate: sizeof(appc_ca_adm)    8000    (80)

M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

M  DpShMCreate: sizeof(comm_adm)        552080    (1088)

M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

M  DpShMCreate: sizeof(slock_adm)        0    (104)

M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

M  DpShMCreate: sizeof(file_adm)        0    (72)

M  DpShMCreate: sizeof(vmc_adm)        0    (1864)

M  DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)

M  DpShMCreate: sizeof(gw_adm)    48

M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000ED60050, size: 6348592)

M  DpShMCreate: allocated sys_adm at 000000000ED60050

M  DpShMCreate: allocated wp_adm at 000000000ED62150

M  DpShMCreate: allocated tm_adm_list at 000000000ED683A0

M  DpShMCreate: allocated tm_adm at 000000000ED68400

M  DpShMCreate: allocated wp_ca_adm at 000000000F2CC2A0

M  DpShMCreate: allocated appc_ca_adm at 000000000F2D2060

M  DpShMCreate: allocated comm_adm at 000000000F2D3FA0

M  DpShMCreate: system runs without slock table

M  DpShMCreate: system runs without file table

M  DpShMCreate: allocated vmc_adm_list at 000000000F35AC30

M  DpShMCreate: allocated gw_adm at 000000000F35ACB0

M  DpShMCreate: system runs without vmc_adm

M  DpShMCreate: allocated ca_info at 000000000F35ACE0

M  DpShMCreate: allocated wall_adm at 000000000F35ACF0

M  ThTaskStatus: rdisp/reset_online_during_debug 0

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  Using implementation view

X  <EsNT> Using memory model view.

M  <EsNT> Memory Reset disabled as NT default

X  ES initialized.

M 

M Fri Jun 13 23:52:40 2014

M  ThInit: running on host sapserverprd

M 

M Fri Jun 13 23:52:41 2014

M  calling db_connect ...

C  Prepending F:\usr\sap\PRD\DVEBMGS00\exe to Path.

C  Oracle Client Version: '10.2.0.2.0'

C  Client NLS settings: AMERICAN_AMERICA.UTF8

C  Logon as OPS$-user to get SAPSR3's password

C  Connecting as /@PRD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)

C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch

C    0 UTF8                                                      1 0000000012D6C0C0 0000000012D742F0 0000000012D90B18

C  Attaching to DB Server PRD (con_hdl=0,svchp=0000000012D909D8,srvhp=0000000012D92E08)

C  Starting user session (con_hdl=0,svchp=0000000012D909D8,srvhp=0000000012D92E08,usrhp=0000000012D74B08)

C  *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033

[dboci.c      4532]

C  Detaching from DB Server (con_hdl=0,svchp=0000000012D909D8,srvhp=0000000012D92E08)

C  *** ERROR => CONNECT failed with sql error '1033'

[dbsloci.c    11044]

C  Try to connect with default password

C  Connecting as SAPSR3/<pwd>@PRD on connection 0 (nls_hdl 0) ... (dbsl 700 250407)

C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch

C    0 UTF8                                                      1 0000000012D6C0C0 0000000012D742F0 0000000012D90B18

C  Attaching to DB Server PRD (con_hdl=0,svchp=0000000012D909D8,srvhp=0000000012D92E08)

C  Starting user session (con_hdl=0,svchp=0000000012D909D8,srvhp=0000000012D92E08,usrhp=0000000012D74B08)

C  *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033

[dboci.c      4532]

C  Detaching from DB Server (con_hdl=0,svchp=0000000012D909D8,srvhp=0000000012D92E08)

C  *** ERROR => CONNECT failed with sql error '1033'

[dbsloci.c    11044]

B  ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]

B  ***LOG BY2=> sql error 1033   performing CON [dblink#5 @ 431] [dblink  0431 ]

B  ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#5 @ 431] [dblink  0431 ]

M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]

M  in_ThErrHandle: 1

M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]

M 

M  Info for wp 0

M 

M    stat = WP_RUN

M    waiting_for = NO_WAITING

M    reqtype = DP_RQ_DIAWP

M    act_reqtype = NO_REQTYPE

M    rq_info = 0

M    tid = -1

M    mode = 255

M    len = -1

M    rq_id = 65535

M    rq_source =

M    last_tid = 0

M    last_mode = 0

M    semaphore = 0

M    act_cs_count = 0

M    csTrack = 0

M    csTrackRwExcl = 0

M    csTrackRwShrd = 0

M    mode_cleaned_counter = 0

M    control_flag = 0

M    int_checked_resource(RFC) = 0

M    ext_checked_resource(RFC) = 0

M    int_checked_resource(HTTP) = 0

M    ext_checked_resource(HTTP) = 0

M    report = >                                        <

M    action = 0

M    tab_name = >                              <

M    attachedVm = no VM

M 

M  *****************************************************************************

M  *

M  *  LOCATION    SAP-Server sapserverprd_PRD_00 on host sapserverprd (wp 0)

M  *  ERROR       ThInit: db_connect

M  *

M  *  TIME        Fri Jun 13 23:52:41 2014

M  *  RELEASE     700

M  *  COMPONENT   Taskhandler

M  *  VERSION     1

M  *  RC          13

M  *  MODULE      thxxhead.c

M  *  LINE        10688

M  *  COUNTER     1

M  *

M  *****************************************************************************

M 

M  PfStatDisconnect: disconnect statistics

M  Entering TH_CALLHOOKS

M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]

M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]

M  Entering ThSetStatError

M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M  Entering ThReadDetachMode

M  call ThrShutDown (1)...

M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 1180) [dpnttool.c   327]

_________________________________________________________________________

when i try to start DATABASE it is showing error:

please suggest me a solution with your experience

Thanks.

heyi!! i am trying to learn SAP BASIS and new to it ..if any one can share some authenticated notes of SAP STMS...i be very thankful.              

Hi Team,

My EWA report is showing red alert, as the sec_info & reg_info file is containing default entries(P TP=* etc).

For a new system we can add the entries to the list easily, but what should be done for an existing system?

Can anyone help me with what are the entries which has to be considered to be added in the sec_info & reg_info for an existing system?

Please advice.

Regards,

Nivin

Hi Team,

As par of EWA recommendations, I ran RSECNOTE report in production system & got some note suggestions to be implemented.

These are:

1718613

1778949

1816331

1821019

1826162

1827217

1837030

1842406

1848996

Can these be implemented in the system without creating any impacts? Please suggest.

My system is ECC 6- Ehp 4.

Thanks,

Nivin

How we need to send bigger file size than configured. Recieved part of document, not more than 2 MB. Please asses the issue here and tell me solution to fix the issue please.

I have an SAP BI Portal system and an SAP BW system.

In the Visual Administrator of the BI Portal, section 'JCo RFC Provider' I have created some RFC listeners. In the SAP BW system (in transaction SM59), I have created, tested and activated the relevant RFC connections.

When I start a JCo RFC Provider in the BI Portal the BW system that it communicates with produces these errors (displayed from SAP transaction SM21):

Operating system call recv failed (error no. 104 )

Module nam Line Error text Caller.... Reason/cal nixxi.cp
5087 recv104 NiIRead recv

Documentation for system log message Q0 I :

The specified operating system call was returned with an error. For communication calls (receive, send, etc) often the cause of errors are network problems.

It could also be a configuration problem at operating system level. (file cannot be opened, no space in the file system etc.). Additional specifications for error number 104 Name for errno number E_UNKNOWN_NO The meaning of the value stored in 'errno' is platform-dependent. The value which occurred here is unknown to the SysLog system. Either there is an incorrect error number in the SysLog message, or the tables TSLE2 or TSLE3 are not completely maintained.

Technical details

File Offset RecFm System log type Grp N variable message data

6 410220 m Error (Function,Module,Row) Q0 I recv104 NiIReadrecv nixxi.cp5087

There is plenty of space left in the file system, the servers can ping each other and there is no firewall between the servers. The tables (TSLE2 or TSLE3) mentioned in the error message do not provide any additional information.

Please can you tell me if this error message refers to something specific, or if it is generic:

recv104 NiIReadrecv nixxi.cp5087

Dear Experts,

I am installing SAP netwaver 7.4 PI server on Windows server 2012 and MS SQL 2012.

This is a domain installation so infra team have created 2 users <SID>ADM and SAPService<SID> user with local admin rights.

I have installed MS SQL with windows authentication only installation and after that i was able to connect Db with SQL management studio.

As soon as i have started PI installation after SWPN created DB schema ,granted permission for users and restarted Db engine ...boom error in ABAP import phase as "R3load.exe failed to testconnect with return code2".

I have updated r3trans,r3load,dbsl lib.etc but no good also i have tried to open MS sql management studio but now it is giving error as

"unable to connect with <SID>ADM user"

Any suggestion or help will be highly appreciated.

Warm Regards,

Sumit 

Dear Experts,

I need to set new client 100 as productive client in SAP Netweaver 7.4 PI server.

Please help me finding the link.

Also i need to patch only Java instance through SUM so how should i proceed in registering system in MOPZ and further steps,please help

Warm Regards,

Sumit

Hello Experts,

I am trying to upgrade kernel of our ERP 6.0 EHP6 system from 720 EXT 64-bit UC to 721 EXT 64-bit UC. But after copying and replacing the files of 721 kernel the system doesn't come up. The dispatcher goes down after few minutes. Please suggest.

Thanks in advance.

Regards

Megha Aggarwal

Hi!

I am trying to install a additional language (IT) into my SAP EHP4 system.

When I execute the import within the tcode SMLT I get the following errors for the component SAPKLITSR1EHP4ERP6F1:

Import  (8) Ended with errors:

The errors are:

Table THREIC_CON_T is not in nametab     

Table T5F99M2T is not in nametab         

Table T5F99M3T is not in nametab         

Table T5F99M4T is not in nametab         

Table T5F99MCT is not in nametab         

Table T5IT36T is not in nametab          

Table FPB_EXP_SECTT is not in nametab    

Table FPB_EXP_CA_ITM1T is not in nametab 

I have checked and founded that the tables are not in system.

Question:

Are there some actions to continue?

How can I solve this problem?

Any helpful information will be very appreciated

Hi

I am getting the following errors when Jstartup tries to start the SDM or when I run any of the sdm commands with jstartup parameters - eg sdm.sh jstartup mode=integrated

Oct 7, 2008 8:47:20 AM   Info: ============================================

Oct 7, 2008 8:47:20 AM   Info: =   Starting to execute command 'server'   =

Oct 7, 2008 8:47:20 AM   Info: ============================================

Oct 7, 2008 8:47:20 AM   Info: Starting SDM - Software Deployment Manager...

Oct 7, 2008 8:47:21 AM   Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0013.20070717141415.0000

Oct 7, 2008 8:47:31 AM   Info: JStartupFramework is requesting to start the SDM Server.

Oct 7, 2008 8:47:31 AM   Info: SDM is not integrated in JStartupFramework. This is an illegal state.

Oct 7, 2008 8:47:31 AM   Error: Could not start SDM. Precondition not fulfilled. Return code: 8

Oct 7, 2008 8:51:23 AM   Info:

Oct 7, 2008 8:51:23 AM   Info: =   Starting to execute command 'jstartup'   =

Oct 7, 2008 8:51:23 AM   Info: ==============================================

Oct 7, 2008 8:51:23 AM   Info: Starting SDM - Software Deployment Manager...

Oct 7, 2008 8:51:24 AM   Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0013.20070717141415.0000

Oct 7, 2008 8:51:42 AM   Info: Initializing Network Manager (50017)

Oct 7, 2008 8:51:43 AM   Info: Checking if another SDM is running on port 50018

Oct 7, 2008 8:51:43 AM   Error: This SDM installation is not integrated in the JStartupFramework. "jstartup" is not supported.

Oct 7, 2008 8:51:43 AM   Error: Processing error. Return code: 304

The jstartup parameters do exist in the instance profile.

Please assist - is there something I can do to get the SDM to be integrated in the JStartupFramework?  SDM server does start without this, but obviously JSPM can't work as it cannot set any parameters.

Any assistance appreciated

Thanks

Leigh

Hello Gurus,

The recommended value for the parameter gw/acl_mode in production systems is "1".

What can be the impacts or risks if I still keep it as "0"?

Regards,

Nivin

Hi,

I am trying to complete my ECC6 EHP4-ready installation by installing

Enhancement package 4 with EHPI tool.

In the initial Extraction phase Import tools (TOOLIMPI) the

installation gets stuck for long time and doesnt progress. When I stop

it Imanually I see this:

Jul 8, 2009 5:03:11 PM [Error]: Unable to execute the SDT request ABAP

operation extract on hostname degtlun1141 instance 33

Then, I see this error in the sdt trace directoty under the

installation folder:

/EHPI/sdt/trc

Here is the error in the file server.trc:

Jul 8, 2009 4:07:46 PM [Error]:                   

com.sap.sdt.lup.ctrl.SDTRequestExecutor.invokeMethod

(SDTRequestExecutor.java:267) [Thread[ABAP-3,5,main]]: Unable to

execute the SDT request ABAP operation extract on hostname degtlun1141

instance 33

Jul 8, 2009 4:11:27 PM

[Error]:                                                      

com.sap.sdt.sapup.rapi.connector.R3upConnector [Thread[ABAP-3,5,main]]:

Could not connect to degtlun1141:4240. Could not connect to host

degtlun1141 on port 4240.

java.net.ConnectException: Connection refused

java.net.ConnectException: Connection refused

When I do a netstat for this port, I see that it is used at the time but by

the EHPI itself because when I stop it the port shows no activity again.

How to proceed i this case?

Thanks

Cyrus

Hi ,

We have web dispatcher which is used for accessing portal and fiori using public url as below .

https://fiori.xyzcorp.com

https://portal.xyzcorp.com

But when they're trying to access via internet portal url goes to https://portal.xyzcorp.com/startPage by default it should route to irj/portal

Same for Fiori also I'm using the  ICM redirect parameter still can't access

icm/HTTP/redirect_0 = PREFIX=/, FOR=portal.xyzcorp.com:*, TO=/irj/portal,

icm/HTTP/redirect_1 = PREFIX=/, FOR=Fiori.xyzcorp.com:*, TO=/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html?sap-client=800&sap-language=EN,

Could you please share you thoughts?

Hi experts,

A question on Netweaver 7.3 Java stack.

Is there anyone using the SAP EHP1 for NetWeaver 7.3 Java stack only? I am using it and I wish to update it via support package stack. However, the SAP info () states the followings:

    Implementation and maintenance of SAP EHP1 for SAP NetWeaver 7.3 via SP Stacks is only possible via SAP Solution Manager's Maintenance Optimizer (MOPZ).

        https://websmp102.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179415&_HIER_KEY=601100035870000235569&_HIER_KEY=701100035871000561809&   

From what I understand, since MOPZ only available on the ABAP stack, I am unable to use MOPZ. Hence, there is no way to update the Java stack via support package stack. So I can only update the AS Java via downloading individual patches in form of SCA files from "Support Packages and Patches". This too I am not so sure that I would be able to install them via Software Update Manager (SUM).

Is this understanding correct? I hope I am wrong about this.

Please correct me if I am wrong.

Thanks.

Hi Folks,

I have a doubt, i was trying to create a new node for sending out faxes.

I had used the option create with node. The problem i am facing is that why i am unable to key in rfc name , why is it saying that we have to key in mail host name.

I have attached the screenshot as well.

Hi All,

i have a RFC connection error between SAP EHP 2 (Windows) to NW CE 7.3 (SuSe). I already check Firewall etc. 

EHP

CES work fine.

Any help would be appreciated

Thanks

Hello Gurus,

While doing a system copy via R3Load method for a ECC6.0 EHP6 on Win 2008 R2 , Oracle 11.2.0.3  system , I got an error during the ABAP Import phase on the target system for the last 2 packages

SAPAPPL0_1 & SAPAPPL0_2

Error Details for SAPAPPL0_1

--------------------------------------------

START OF LOG: 20140527194315

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#17 $ SAP

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]

Compiled Jan 16 2013 17:01:57

patchinfo (patches.h): (0.324) SYB: migration to sybase using unsorted unload/load (note 1734039)

process id 1556

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL0_1.cmd -dbcodepage 4103 -l SAPAPPL0_1.log -stop_on_error

DbSl Trace: ORA-1403 when accessing table SAPUSER

(DB) INFO: connected to DB

(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16

(GSI) INFO: dbname   = "DEV20140526020559                                                                                                               "

(GSI) INFO: vname    = "ORACLE                          "

(GSI) INFO: hostname = "ORSAPDEV02                                                      "

(GSI) INFO: sysname  = "Windows NT"

(GSI) INFO: nodename = "ORSAPDEV02"

(GSI) INFO: release  = "6.1"

(GSI) INFO: version  = "7601 Service Pack 1"

(GSI) INFO: machine  = "2x AMD64 Level 6 (Mod 44 Step 2)"

(RTF) ########## WARNING ###########

  Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases

(SQL) INFO: Searching for SQL file SQLFiles.LST

(SQL) INFO: SQLFiles.LST not found

(SQL) INFO: Searching for SQL file S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST

(SQL) INFO: found S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST

(SQL) INFO: Trying to open S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST

(SQL) INFO: S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST opened

(SQL) INFO: Searching for SQL file APPL0.SQL

(SQL) INFO: APPL0.SQL not found

(SQL) INFO: Searching for SQL file S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) INFO: found S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) INFO: Trying to open S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) INFO: S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL opened

(SQL) ERROR: Invalid entry at line 5 in file S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) ERROR: SQL list was not built successfully

(DDL) ERROR: check_sql_list() failed for /1CN/CPASAP00001

(IMP) INFO: a failed DROP attempt is not necessarily a problem

(SQL) ERROR: SQL list was not built successfully

(DDL) ERROR: check_sql_list() failed for /1CN/CPASAP00001

(DB) INFO: disconnected from DB

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe:

END OF LOG: 20140527194325

Error log for package SAPAAPL0_2

---------------------------------------------------------

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140527194315

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#17 $ SAP

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]

Compiled Jan 16 2013 17:01:57

patchinfo (patches.h): (0.324) SYB: migration to sybase using unsorted unload/load (note 1734039)

process id 5028

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL0_2.cmd -dbcodepage 4103 -l SAPAPPL0_2.log -stop_on_error

DbSl Trace: ORA-1403 when accessing table SAPUSER

(DB) INFO: connected to DB

(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF16

(GSI) INFO: dbname   = "DEV20140526020559                                                                                                               "

(GSI) INFO: vname    = "ORACLE                          "

(GSI) INFO: hostname = "ORSAPDEV02                                                      "

(GSI) INFO: sysname  = "Windows NT"

(GSI) INFO: nodename = "ORSAPDEV02"

(GSI) INFO: release  = "6.1"

(GSI) INFO: version  = "7601 Service Pack 1"

(GSI) INFO: machine  = "2x AMD64 Level 6 (Mod 44 Step 2)"

(RTF) ########## WARNING ###########

  Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases

(SQL) INFO: Searching for SQL file SQLFiles.LST

(SQL) INFO: SQLFiles.LST not found

(SQL) INFO: Searching for SQL file S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST

(SQL) INFO: found S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST

(SQL) INFO: Trying to open S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST

(SQL) INFO: S:\SBX_Export_dump\ABAP\DB/SQLFiles.LST opened

(SQL) INFO: Searching for SQL file APPL0.SQL

(SQL) INFO: APPL0.SQL not found

(SQL) INFO: Searching for SQL file S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) INFO: found S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) INFO: Trying to open S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) INFO: S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL opened

(SQL) ERROR: Invalid entry at line 5 in file S:\SBX_Export_dump\ABAP\DB/ORA/APPL0.SQL

(SQL) ERROR: SQL list was not built successfully

(DDL) ERROR: check_sql_list() failed for KALM

(IMP) INFO: a failed DROP attempt is not necessarily a problem

(SQL) ERROR: SQL list was not built successfully

(DDL) ERROR: check_sql_list() failed for KALM

(DB) INFO: disconnected from DB

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)

D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140527194334

Further Details

==============

Had chosen to split tables before copy and had also executed SMIGR_CREATE_DDL report prior to DB export with target - Oracle DB.

Copied the resultant .SQL files into Export_dump/ABAP/DB directory.

After getting the error, and reading the guides and the posts on SCN , I copied the .SQL files into ABAP/DB/ORA directory as well and then restarted the Import again for the failed packages, but the import fails again.

Any clues/ suggestions would really be helpful.

Regards

Prashant

Hello Everyone!

I have downloaded SAP Crystal Report demo 30 days and we have an IDES for "EHP6 FOR SAP ERP 6.0", how can I make some reports and train myself with crystal report?

I don't understand how to make the connection to our SAP DB, can you help me?

Thank  you!

Denis