Quantcast
Channel: SCN : All Content - SAP NetWeaver Application Server
Viewing all 2997 articles
Browse latest View live

WebDispatcher : SRCURL to redirect only specific Webdynpros

0
0

Hello,

 

 

We are running HR Renewal 2.0 and as such we had to setup the Webdispathcer rules as indicated in the Administrator Guide.

Basically the same URL is used to access services in the two backends systems ECQ and GWQ

 

 

wdisp/system_1 = SID=GWQ, MSHOST=srv-qsap-gwpa.domain, MSPORT=8111, SRCSRV=*:44310, SRCURL=/sap/saml2/sp/;/sap/opu/sdata/;/sap/opu/odata/;/sap/bc/ui2;/sap/public/bc/ui2/;/sap/bc/ui5_ui5/sap/arsrvc_suite_pb/,CLIENT=400

 

wdisp/system_2 = SID=ECQ, MSHOST=srv-qsap-ecpa.domain, MSPORT=8111, SRCSRV=*:44310, SRCURL=/,CLIENT=400

 

No problem until that. (Note that all the HR webdynpros are found in the ECQ system)

 

 

Now we are also using an Identity Provider (ADFS) and  the following Webdynpro needs to be found on the GWQ System:/sap/bc/webdynpro/sap/saml2

 

So I tried all the following settings and it did not work :

wdisp/system_1 = SID=GWQ, MSHOST=srv-qsap-gwpa.domain, MSPORT=8111, SRCSRV=*:44310, SRCURL=/sap/bc/webdynpro/sap/saml2;/sap/saml2/sp/;/sap/opu/sdata/;/sap/opu/odata/;/sap/bc/ui2;/sap/public/bc/ui2/;/sap/bc/ui5_ui5/sap/arsrvc_suite_pb/,CLIENT=400

 

wdisp/system_1 = SID=GWQ, MSHOST=srv-qsap-gwpa.domain, MSPORT=8111, SRCSRV=*:44310, SRCURL=/sap/bc/webdynpro/sap/saml2*;/sap/saml2/sp/;/sap/opu/sdata/;/sap/opu/odata/;/sap/bc/ui2;/sap/public/bc/ui2/;/sap/bc/ui5_ui5/sap/arsrvc_suite_pb/,CLIENT=400

 

wdisp/system_1 = SID=GWQ, MSHOST=srv-qsap-gwpa.domain, MSPORT=8111, SRCSRV=*:44310, SRCURL=/sap/bc/webdynpro/sap/saml2/;/sap/saml2/sp/;/sap/opu/sdata/;/sap/opu/odata/;/sap/bc/ui2;/sap/public/bc/ui2/;/sap/bc/ui5_ui5/sap/arsrvc_suite_pb/,CLIENT=400


I read the documentation again, and it turns out that SRCURL specifes the possible URL prefixes, so if I add the prefix /sap/bc/webdynpro/sap/ to

GWQ, il would work fine, but then all HR Webdynpros would not be found on ECQ


 


wdisp/system - SAP Web Dispatcher - SAP Library


rabhi3.png


saml2 is not a prefix, it is a webdynpro.

Is there a way to exclude the Webdynpro saml2 from being found on ECQ ?

Is there a way to selectively force the sapwebdispatcher to look for /sap/bc/webdynpro/sap/saml2 on GWQ ?



Thank you







Hi this is question on sap abap architecture

0
0

    HI experts,

 

               I want to know from where the user context is copied from ? when the user context is processed mean before request going to dispatcher or after assigning request to work processes?


Thanks in advance .

SAPK-61712INSAPFIN upgrade

0
0

Hi Experts

 

I am new to SAP  BASIS,kindly advice for the upgradation steps  for SAPK-61712INSAPFIN.

 

 

What are the basic requirments for the same

 

Thanks

Karthik

Support pack installation error on NW 7.31

0
0

Dear Support


we have installed nw 7.31 0000 system now we are trying to Upgrade

Support pack 0016 from 0000 and we have downloaded all support pack of

all relevant components like

SAP SAP_BASIS 731 0000 - SAP Basis Component

SAP_ABA 731 0000 - Cross-Application Component

PI_BASIS 731 0000 - Basis Plug-In

SAP_BW 731 0000 - SAP Business Warehouse

 

and update our spam level to 59 which was at 43 then started the upgradeit get stuck at DDIC activation phase for 30 hours then we reset the

queue when we found some note to implement before upgrade then we

applied that notes

0001614802

0001660078

0001672480

0001678047

0001778145

 

all created in separate request and now I am not able to release the

request it shows inactive open objects in se80

 

now tell what should to done

 

Kindly suggest wheatear to take access key for all objects are there is

any other way to release the request



Regards

How to change date format, numbers format in SAP

0
0

Dear experts,

 

I want to change the date format to US and numbers to show with , after 1000's. I want to do it for all users. can you please let me know where this properties can be set.

JAVA instance startup issue

0
0

We are facing an issue in JAVA instance startup. I have attached the error in jvm_bootsrap  I also wanted to know how can we modify element-info under server node in configtool.
Looks like need to put os.name, os.bit.length and os.Unicode in element info sheet. I have also attached the screenshots of the old instance ID and new instance ID. Looks like old instance ID had these entries.

 

Thanks in advance!

 

Regards,

SJ

Clicking on forgot password link email is not getting delivered

0
0

Hi,

 

We have a SAP Netweaver JAVA stack system 731 SP 08.

I have followed link to enable "forgot Password Link"

 

http://help.sap.com/saphelp_nw70/helpdata/en/45/7e6313d8780dece10000000a11466f/content.htm?

frameset=/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm¤t_toc=

/en/06/371640b7b6dd5fe10000000a155106/plain.htm&node_id=279&show_children=false

 

However even If I am able to reset the password successfully prompt but I am not getting any email. Whereas I am able to send email using the SMTP server from the OS. telnet to port 25 is also working fine.Any idea?

 

Thanks,

Mofizur

Webservice not available in target system - after transport !!!!

0
0

Hi

We have a ECC 5.0 box ( WAS 640 ) and have created Webservice definitions and released it to SOAP runtime. We were able to make calls to the this Webservice from external SOAP clients and looks ok. We had this webservice definition ( and its associated objects like - virtual interface,server proxy implementation etc ) moved to our QA system. In the QA system - we had to release the WS for runtime using t.code WSCONFIG and the service shows up in SICF transaction under /default_host/sap/bc/srt/xip/sap/ as active . But we are unable to access the service in our QA system http://xxxxxx:8625/sap/bc/srt/xip/sap/SVCNAME?sap-client=080&wsdl=1.1 ?

 

We checked the icm monitor from SMICM and everything looks ok in QA and the very same as in development. Can anybody out there help me with this ? Any pointers/similar experiences /known problems with transport webservices- and how you resolved it would be extremely helpful and appreciated.

 

This is the first time we are trying out this mode and we are under time-pressure to get this working. Appreciate your input.


System copy on HANA

0
0

Hello

 

if anyone did a system copy for ECC6 on HANA , will realize that there are no export anymore as per SAP instruction and you can do the process using SWPM and HANA backups..

 

I have a question during the system copy procedure the SWPM ask about the Netweaver Kernels only !! and then ask about the DB backups ...how come it can get all the Binaries and Batches related to the installation ? any ideas?

 

Regards,

Language import on box remote from landscape

0
0

Hello,

 

Very long story short, I am stuck in a situation with our Production server being physically separated from the rest of our landscape and only being connected by a 20 Mbps VPN connection. The landscape is very basic:  Development (DEV) >> Quality (QAS) >> Production (PRO).

 

Before the production server was moved away from the rest of the landscape, due to disaster recovery, I successfully installed the Japanese language throughout the landscape (DEV, QAS & PRO).  I now need to install Spanish (ES) and have successfully installed it in our DEV and QAS systems.  I am in the process of installing on our PRO system and am now seeing extreme lag during the "Import Language Parts of Support Packages".  There are about 1,000 entries for this.

 

Before starting the language import on PRO, I copied all of the PAT/SAR files from our DEV server's EPS\in directory to the production server (same directory).  I also copied all of the cofiles for good measure.  Our TMS is configured to go from DEV, to QAS, to PRO, despite the 20 Mbps connection, so normal transports are slow to production, but manageable.  With this language import, it went from a minute, or two per package in DEV and QAS to taking about 12 hours to perform about 10 package installs.

 

My question is: How do I get the language import to look only at the production server?  I'm hoping not to reconfigure TMS, but if that what needs to be done, then so be it.

 

With all of the support packages on the local server, I would think that it shouldn't need to go back across the wire to DEV, or QAS to import the support packages.  However, the lag is telling me that it is.  Any input would be greatly appreciated!

 

Just for info we're running on Windows 2012 R2 with MS SQL 2012.

 

Thanks!

 

-Joe

probels installing new license key

0
0

Hi, I have problems while installing new license key on my NSP demo system. Is not the first time I've done it.

 

I have to logged in with SAP* because license has expired.

 

Go to transaction SLICENSE and, after requesting new license key, next error appears when trying to install it.

 

This system's system number is "000000000311048508", but there is a license key for system number "000000000311107510" in the license key file.

 

Does anyone how to proced in order to install it correctly?

 

Thanks.

Some recipients of internal sending of PO document doesn't receive any email notification about PO approval

0
0

Hi,

 

Have used SOST tcode to trace recipient of PO document for internal sending via Microsoft outlook. Have saw the recipients there.

 

But some of the recipients (sap users) of PO email have not received any notification that PO has been approved in Microsoft Outlook.

 

Just want to know the reason why it happened and the remedies for this issue.

 

Thanks and regards,

Jeremiah Dollente

MM Consultant

SAP gui for iPhone or iPad

0
0

Hi gurus,

 

Do you know any possible way to access to SAP ECC 6.0 over iPhone or iPad?

 

Thanks,

 

Anna

Remote Client copy error

0
0

Hello Gurrus

 

how are you ppl hope you are fit and fine i urgently need help from you i was copy remote client SCC9 i am facing some error LOG is attached with this email

n server 1 ETA028XClient copy from "10.11.2006" "12:08:58" 1 ETA029 System ID............................ "QAS"

1 ETA043 Target client........................ "100"

1 ETA030 R/3 Release.......................... "620"

1 ETA354 Basis Support Package..............."SAPKB62041"

1 ETA031 Host................................. "pklahm04"

1 ETA000 Start in background............. ....." " 1 ETA032 User................................. "SAP*"

1 ETA033 Parameter

1 ETA350 Source destination......................"DEV"

1 ETA351 Source system........................."DEV"

1 ETA352 Client in source system.............."200"

1 ETA353 Users in source system.............."SAP*"

1 ETA354 Basis Support Package..............."SAPKB62041"

1 ETA185 Copier profile:......................."SAP_ALL"

1 ETA036 Table selection

1 ETA177 Customizing data ....................."X"

1 ETA037 With application data................ "X"

1 ETA155 Initialize and recreate......... "X"

1 ETA294 Change documents are not copied

1 ETA040 Test mode (without database update).. "R"

2 ETA367XStart analysis of system "12:08:58"

3 ETA108 "ADDR_CLIENTCOPY_SELECT_TABLES" executed " 25"(" 0") entries copied

4 ETA114 Runtime " 0" seconds

3 ETA072 Exit program "ADDR_CLIENTCOPY_SELECT_TABLES" successfully executed "12:09:01"

3 ETA108 "EFG_FORM_CC_EXIT_BEFORE" executed " 0"(" 0") entries copied

4 ETA114 Runtime " 0" seconds

3 ETA072 Exit program "EFG_FORM_CC_EXIT_BEFORE" successfully executed "12:09:01"

3 ETA108 "CLIENTCOPY_SELECT_TEXTTAB" executed " 3"(" 0") entries copied

4 ETA114 Runtime " 0" seconds

3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTTAB" successfully executed "12:09:01"

2EETA308 Table definition "CE1OC09" missing in the target system

2EETA308 Table definition "CE2OC09" missing in the target system

2EETA308 Table definition "CE3OC09" missing in the target system

2EETA308 Table definition "CE4OC09" missing in the target system

2EETA308 Table definition "CE4OC09_ACCT" missing in the target system 2EETA308 Table definition "CE4OC09_FLAG" missing in the target system 2EETA308 Table definition "CE4OC09_KENC" missing in the target system 1EETA254 Critical differences: Missing tables: " 7"

1EETA716 Client Copy could not start because of Repository differences

1 ETA190 Run cancelled

2 ETA191 Program ended abnormally

 

This means there is some table/object missing on my QAS server i was searched these tables on DEV but cant find could you please tell me where i found these tables in DEV and how could i see there structer and how could i create new tables in QAS Please help me out thanks in advanced

 

Regards

Muhammad Arshad Ghaznavi

Cell no: 923008235609

e-mail: arshadg@khi.wol.net.pK

User Authentication logon failed issue in nwa and portal.

0
0

Hi All,

 

We are  unable login into NWA and PORTAL home page due to "Authentication failed issue."

 

Please check attached error details and help me to fix the issue.

 

 

Regards

Vijay.


SAP Gateway 2.0 installation

0
0

Hi Experts

here we have a requirement to install Fiori   SAP Gateway 2.0 i am very new to this i want i would i start install process of the same

 

send me some links so i can move ahead i found some documents those are not sufficient..

 

i need to wholeo installation process

 

Regards

SUM (Cisi-file) phase stops with error

0
0

Hello all,

 

we try to correct some System-Informations with help of a generated Cisi-Stack-File.

 

If we start the process in SUM, the step SYIDUP_CHECK/APPLY_SYSINFO_CHK stops with the following error in Log-File:

 

----------

2 ETQ374 parameter "EV_RC" = "12"

2 ETQ373 parameter "EV_MESSAGE" = "XML file 'C:/Users/m1dadm/Desktop/stack_for_cisi.xml ' does not exist or could"

1EETQ399 Last error code set is:

1EETQ204 Upgrade phase "APPLY_SYSINFO_CHK" aborted with severe errors ("20160205113018")

----------

 

Any suggestions ? Unfortunately i can't find detailed information for this action.

 

In the SUM-documentation there are only 2 or 3 sentences about it.

How to check if a sap mail has attachement/its attachement has been attached?

0
0

Hi,

 

One of our users send a PR with attachment, but the purchasing department didn't receive the attachment. I want to investigate if the user successfully attached the file on sapmail.

 

Can I ask where can check if that sapmail has attachment?

 

Thanks and regards,

Jeremiah Dollente

Access HANA via WD using HTTPS

0
0

Hi !

 

I'm able to access my xs Engine using https://hana host:4310

I need to get this working using a Web Dispatcher HTTPS port.

 

I'm able to access http://<WD host>:<WD port for HANA> just fine...but when I try to change HTTP to HTTPS in the WD profile, it fails with the below error:

 

Checking external server https://Hana host:4310...[Thr 140069963814752] *** ERROR during SecuSSL_SessionStart() from SSL_connnect()==SSL_ERROR_SSL

[Thr 140069963814752]    session uses PSE file "/usr/sap/WED/W02/sec/SAPSSLA.pse"

[Thr 140069963814752] SecuSSL_SessionStart: SSL_connnect() failed  (536872221/0x2000051d)

[Thr 140069963814752]    => "SSL API error"

[Thr 140069963814752] >> ---------- Begin of Secu-SSL Errorstack ---------- >>

[Thr 140069963814752] 0x2000051d | SAPCRYPTOLIB | SSL_connect

[Thr 140069963814752] SSL API error

[Thr 140069963814752] Failed to verify peer certificate. Peer not trusted.

[Thr 140069963814752] 0xa0600203 | SSL | ssl_verify_peer_certificates

[Thr 140069963814752] Peer not trusted

[Thr 140069963814752] 0xa0600297 | SSL | ssl_cert_checker_verify_certificates

[Thr 140069963814752] peer certificate (chain) is not trusted

[Thr 140069963814752]   Verification result:

[Thr 140069963814752]     Status      :Not successful

[Thr 140069963814752]     Profile     :1.3.6.1.4.1.694.2.2.2.2

[Thr 140069963814752]     DirectlyTrusted:Not successful

[Thr 140069963814752] << ---------- End of Secu-SSL Errorstack ----------

[Thr 140069963814752]   SSL_get_state()==0x2131 "SSLv3 read server certificate B"

[Thr 140069963814752]   SSL NI-hdl 6: local=xyz:51952  peer=xyz:4310

[Thr 140069963814752] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1dec450)==SSSLERR_PEER_CERT_UNTRUSTED

[Thr 140069963814752] *** ERROR => IcrConnOpen: SapSSLSessionStart failed (-102): SSSLERR_PEER_CERT_UNTRUSTED [icxxcheckcon 2700]

ERROR: Connection to server HANA host:4310 failed

 

My WD profile looks as below:

 

icm/server_port_2 = PROT=HTTPS,HOST=HANA host,PORT=8099,TIMEOUT=900,PROCTIMEOUT=900

wdisp/system_2 = SID=HANA SID, EXTSRV=https://HANA host:4310, SRCSRV=*:8099, SRCURL=/

 

When the items in bold are made HTTP, I can access http://WD host:8099 for the xs engine just fine.

 

For HTTPS in the WD profile, The browser says: 503 Service Unavailable

 

Do I need to import some certificate from HANA to the WD ?

HANA & WD lie on the same host.

 

Please help advise...

 

Thanks a lot !

saba.

Forgot to shut off st05 or st01 trace - how to detect

0
0

We have administrators turn on an st05 trace or an st01 trace and then forget to turn it off.  We had it on for 4 days and the system performance gets worse.


What is a good way to check if the trace is on? Or perhaps a way to shut if off with a batch job every night at midnight?  We have 100+ SAP systems and it is not feasible to logon to each system each day to check.

Viewing all 2997 articles
Browse latest View live




Latest Images