Quantcast
Channel: SCN : All Content - SAP NetWeaver Application Server
Viewing all 2997 articles
Browse latest View live

Batch job output to Application server(in ftp folder)

0
0

Hi ,

 

We have a report in trx. MB52  which we can run in dialog and background.

 

I would like to run it in  batch so it runs every day and report output is saved on Application Server (in ftp folder)?

 

I only see an option of sending the output file via email, but I would need a way to point it to AL11 structure.

 

Can anyone suggest something?

 

Thanks.


Shadow Instance fails with SQL error 942

0
0

Dear Experts,

we have Shadow Instance running on Kernel 742 with Oracle 11g on Windows,

we are facing following error and DISPATCHER stopped, could you please guide me in resolving this:

-----------dev_wo.log----------------------------------

 

Sun Nov 15 08:56:21 2015

C          SQL error 942:

C     statement for table 'DDNTT                         ':

C         SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS'                                                           

C     stmt_fetch() -> orc=942, 103=DBSL_ERR_DBOBJECT_UNKNOWN

B  *** ERROR => NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS' FAILED

[dbntab.c     13701]

B  ***LOG BZY=> unexpected return code 103 calling NTAB [dbntab       13703]

B  NTAB: db_ntab(): init_ntab failed, returning 2

B  CALE: table TFACS: db_ntab returned 2

B  ***LOG BZY=> unexpected return code 2 calling read_ntab [dbcalbuf     4781]

C  check2: OCIStmtExecute() failed with -1=OCI_ERROR

C          SQL error 942:

C     statement for table 'DDNTT                         ':

C         SELECT COMPCNT, UNICODELG FROM "DDNTT" WHERE TABNAME = 'SVERS'                                                           

C     stmt_fetch() -> orc=942, 103=DBSL_ERR_DBOBJECT_UNKNOWN

B  *** ERROR => NTAB: SELECT COMPCNT, UNICODELG FROM DDNTT WHERE TABNAME = 'SVERS' FAILED

[dbntab.c     13701]

B  ***LOG BZY=> unexpected return code 103 calling NTAB [dbntab       13703]

B  NTAB: db_ntab(): init_ntab failed, returning 2

B  ***LOG BZY=> unexpected return code 2 calling db_ntab [dbcrtab      7491]

A  *** ERROR => Could not read db table SVERS, rc=4 [sapicc.c     1919]

M  *** ERROR => ThrtDatabaseEnvInit: ThrtReadDBVersion failed (4) [thrtDatabase 52]

M  *** ERROR => ThrtDatabaseEnvInit failed (4) [thxxext.c    186]

M  *** ERROR => ThCallHooks: event handler ThrtStartup for event CREATE_SHM failed (4) [thSos.c      2093]

M  *** ERROR => ThIPCInit: hook failed [thxxhead.c   1443]

M  ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1171]

M  in_ThErrHandle: 1

M  *** ERROR => ThInit: ThIPCInit (step TH_INIT, thRc ERROR-CORE-INIT_FAILED, action STOP_WP, level 1) [thxxhead.c   2393]

M  Info for wp 0

M    pid = 2960

M    severity = 0

M    status = 0

M    stat = WP_NEW

M    waiting_for = NO_WAITING

M    workerType = DP_WORKER_DIAWP

M    act_cs_count = 0

M    csTrack = 0

M    csTrackRwExcl = 0

M    csTrackRwShrd = 0

M    mode_cleaned_counter = 0

M    control_flag = 0

M Sun Nov 15 08:56:21 2015

M    report = >                                        <

M    action = 0

M    tab_name = >                              <

M  ThIErrHandle: no current incoming request

---------------------------------------------------------------------------------

DEV_WO full log attached.

 

Thanks in advance.

 

Kind Regards,

Domnic

New created SPML-Roles are not working

0
0

Hello,

 

like described in several notes,

we created a Role for SPML-Access in the J2EE-UME

(Create Role -> Add activites to read and write SPML -> Add the role to a new user).

 

But if we try to log on the SPML-Testpage,

with the new User SPML_FULL_ACCESS,

we get the error, that we don't have permission to access it.

 

Also if we try to use this user in the solman_setup for the system-parameters.

 

Any suggestions, where we can find the reason or a detailed error-message for this ?

 

What can be the cause for this ?

"RFCDEST_CREATE_O2S" aborted with severe errors in SUM

0
0

Dear Experts,

 

In EHP5 to EHP7 upgrade error in  Road Map 5.3 CONFIGURATION "RFCDEST_CREATE_O2S" aborted with severe errors

 

Shadow instance is created but its  DISPATCHER is down

 

"check2: OCIStmtExecute() failed with -1=OCI_ERROR--- SQL error 942 "  in dev_w0.

 

Please find the Dev_w0 and PhaseLog attached.

 

 

 

Kind Regards,

Domnic.

Error when loggong on for external ID "": Error during SAML 2.0 logon

0
0

Hi,

 

I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.

 

N  SAML20 SP (client 400): Incoming Response

N  SAML20 Binding:          POST

N  SAML20 IdP Name:         http://xxxxxx/adfs/services/trust

N  SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder

N  SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint

N  SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0

N  *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]

N  {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1

N  *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]

N  *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]

N  *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]

 

I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20

 

I have added the identity provider through transaction SAML2, but it does not seem to be working.

 

Here is a decrypted SAML assertion:

 

<samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"

  Version="2.0"

  IssueInstant="2015-04-02T00:21:06.477Z"

  Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"

  Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"

  InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"

  xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"

  >

  <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>

  <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">

  <ds:SignedInfo>

  <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />

  <ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />

  <ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">

  <ds:Transforms>

  <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />

  <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />

  </ds:Transforms>

  <ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />

  <ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>

  </ds:Reference>

  </ds:SignedInfo>

  <ds:SignatureValue>xxxxxxx</ds:SignatureValue>

  <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">

  <ds:X509Data>

  <ds:X509Certificate>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</ds:X509Certificate>

  </ds:X509Data>

  </KeyInfo>

  </ds:Signature>

  <samlp:Status>

  <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">

  <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />

  </samlp:StatusCode>

  </samlp:Status>

</samlp:Response>

SUM SP14 - new start command ??

0
0

Hello there,

Has anyone of youevertousethe newSUMSP14??

in the past until SP13 , the SUM was startet with theusersidadm and with with the command

./STARTUP


WithSP14that should be madewith theuser rootanduse the command

./STARTUPConfighostagentSID


Is this right?


i asked because i get this window, when i start the SUM with user root and ./STARTUPConfighostagentSID


sum.jpg

Gruß

Toni

RFC Errors in GUIXT

0
0

Hi,

 

 

I need some Basis advice , I am trying to run some scripts through GUIXT and getting this RFC errors . Give me directions to figure

out error and solution if possible. I have little knowledge of RFC's.

 

rfc.PNG

 

rfc1.PNG

rfc3.PNG

Installation of SAP Netweaver on Suse Linux using Oracle 12 C.

0
0

Dear Experts,

 

 

i am installing SAP Netweaver on Suse Linux using Oracle 12c,

below is the issue please help what can be the solution and process resolve it.

 

1.png

 

ora_sql_results.log file

12.png

 

sapinst_instdir

3.png

 

But Listener is already started

 

Status of Listener

123.png

 

Regards,

 

John


Upgrading error SAP Netweaver 7.40 to 7.42

0
0

Hello,

I have some problems when i try to update my new system SAP Netweaver 7.40 to 7.42.

On step operation system Check I have error "Manual action required" and error text:

"

The SAP Notes listed below contain corrections that are essential for a correct procedure. You can only continue with the procedure after you have implemented the SAP Notes or the specified Support Packages.

Use the Note Assistant to download the following SAP Notes and implement them if applicable. In this system, you can ignore notes that are classified as "can not be implemented" or "obsolete" by the Note Assistant . However, we recommended to transport these inapplicable SAP Notes and the implemented SAP Notes into the system landscape. If you do not transport the inapplicable SAP Notes too, the SUM execution in the follow-up systems will stop in this phase because these SAP Notes are not at the latest level. Use report SCWN_TRANSPORT_NOTES as described in SAP Note 1788379 to transport the SAP Notes.

"

but all notes were installed early and trasport request was released and I used report SCWN_TRANSPORT_NOTES for import required notes again in request.

Some screens atached

NW 7.1 installation - error name or password is incorrect

0
0

Hi,

 

I am doing NW 7.1 installation; current phase is central installation -> Restart instance (abap).  I am getting the below error, log from dev_rfc.trc file:

 

**** ERROR file opened at 20121128 144354 EET, SAP-REL 720,0,62 RFC-VER 3 1184803 MT-SL

T:2 Error in program 'sapinste': ======> Name or password is incorrect (repeat logon)

T:2 Error in program 'sapinste': <* RfcReceive [16] : returns 3:RFC_SYS_EXCEPTION

>TS> Wed Nov 28 17:14:42 2012

T:2 Error in program 'sapinste': ======> Name or password is incorrect (repeat logon)

T:2 Error in program 'sapinste': <* RfcReceive [17] : returns 3:RFC_SYS_EXCEPTION

 

 

I have checked the ddic pw in client 000 and it works fine for me.

 

What could be going wrong?

 

Thanks in advance for your help.

Abdul

Oracle installation error`

0
0

Dear all

 

while installing SAP netweaver 7.31 on linux following error occur

 

Display variable not set

 

our server 10.0.0.xx:5901

 

and i user DISPLAY=10.0.0.xx:1

export DISPLAY

 

oracle executable are empty /oracle/FID/11203/bin/oracle

Batch job output to Application server(in ftp folder)

0
0

Hi ,

 

We have a report in trx. MB52  which we can run in dialog and background.

 

I would like to run it in  batch so it runs every day and report output is saved on Application Server (in ftp folder)?

 

I only see an option of sending the output file via email, but I would need a way to point it to AL11 structure.

 

Can anyone suggest something?

 

Thanks.

STAD RFC API

0
0

Hi,

I am looking for an RFC API which can provide me the STAD Transaction code result similar to the RFC API to read the CCMS monitor templates.

Is there any RFC API which can provide the STAD result?

Unable to logon to nwbc

0
0

Hello,

 

After installation of ERP system I'm not able to logon to NWBC. Neither through NetWeaver Business Client application nor Web Browser. I can access link https://appserver:443/sap/bc/nwbc and I can see the logon form but when I insert logon parameters the page sends me back to logon screen. No errors as pop-up and no errors in browser console. What could cause this? Is there some special configuration besides activating all the necessary ICF services?

STAD CCMS Monitor

0
0

Hi,

 

Is there any CCMS monitor which will provide the result similar to the STAD transaction code output or is it possible to create the custom CCMS monitor for STAD transaction?


Background Job runs long time on Sunday

0
0

Hi Guys,

 

I have a kind of issue like an extraction job triggered from BI system (SAP_BW - Release 731) to ECC 6 (EHP7 FOR SAP ERP 6.0) takes 4-6 hours only on particular day in a week. Every time it happens in ECC side. The same background job triggered from BI system daily 3 times and takes only 10 to 15 min except this one day.

 

I checked few things in ECC side;

 

1. There is no resource bottleneck during the long run

2. I didn't see any lock during this execution

3. I did trace in ST12 and checked the statement where it spent most of its time. The statement looks fine ( because it picks the right index and moreover it happens only on particular day so it is really not an expensive statement issue)  

 

What else do I need to check? Could you please give your suggestion?

 

Regards,

Arun

transaction EC02 / Please create IT/IBC message to change or create org.data: DCI-APPL-IDES

0
0

Dears , Whenever i go to transaction EC02 i can't take any action and this error occurs

 

"Please create IT/IBC message to change or create org.data: DCI-APPL-IDES "

 

could any one help me solving this issue !

 

thanks

Change url called by attachment download

0
0

Hello,

 

 

I have a problem in my SAP systems. Some of the users use NWBC to work and they need to download attachments from other systems.

For exemple : they work on SCM nwbc and try to download a attachment from ECC, The url called at this time is like "http://<hostname_of_ECC_AS.domain_name.com:xxxx/......"  but the proxy doesn't allow the end users to reach "hostname_of_ECC_AS.domain_name.com" url.

 

 

I need to use a generic hostname but i don't find where to change the original AS hostname by a generic hostname, can you help me ?

 

 

Thanks

MESSAGE_TYPE_X (Access sequence A not possible)

0
0

Hello!

Please help solve the problem. My system is IDES 6.0 EHP4. I have a dump:

 

Runtime Errors         MESSAGE_TYPE_X
Short text
     The current application triggered a termination with a short dump.

 

What happened?
     The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type X).

 

What can you do?
     Note down which actions and inputs caused the error.


     To process the problem further, contact you SAP system administrator.

     Using Transaction ST22 for ABAP Dump Analysis, you can look at and manage termination messages, and you can also keep them for a long time.

 

Error analysis
     Short text of error message:
     Access sequence A not possible (access sequence PRHI, access 10, field KONDM)

     Long text of error message:
      Diagnosis
          Access type A (hierarchical access) does not exist.
          This error was triggered by access sequence PRHI, access number 10,
          field KONDM.
      System Response
      Procedure
          Adjust the access type and continue processing.
          For details, see SAP note 1600482.
      Procedure for System Administration

     Technical information about the message:
     Message class....... "VT"
     Number.............. 664
     Variable 1.......... "PRHI"
     Variable 2.......... 10

     Variable 3.......... "KONDM"

     Variable 4.......... " "

 

User and Transaction

    Client.............. 800
    Language key........ "R"
    Transaction......... "VA01 "
    Transactions ID..... "512619B184614866E1000000AC101507"

    Program............. "SAPLV61Z"
    Screen.............. "SAPMV45A 4900"
    Screen line......... 1024

 

Information on where terminated
    Termination occurred in the ABAP program "SAPLV61Z" - in "T682Z_SELECT".
    The main program was "SAPMV45A ".

    In the source code you have the termination point in line 1151
    of the (Include) program "LV61ZU01".

 

I am a SAP system adminitrator.

I read the note 1600482, but did not understand what I need to do.

I installed SPS11, but the problem has not disappeared.

Please tell me step by step where I go and what to do to solve this problem.

Thank you in advance.

How to add load balanced R/3 systems in NWDS

0
0

Overview

The blog describes what to do when you need to add a load balanced R/3 system in the configuration of NWDS, but the list appears as empty.

 

Procedure


1. Open your SAP Logon configurator:

1.jpg

2. Check the name of the system variable that has to be configured:2.jpg

3. Create such as system variable in your Environment:

It should point to the folder and the filename of your saplogon.ini file.

Example: (C:\Users\user\AppData\Roaming\SAP\Common\saplogon.ini)

3.jpg


4. If everything is configured correctly, you should see the list of the systems in NWDS: 4.jpg

Viewing all 2997 articles
Browse latest View live




Latest Images